Flowfit 24VDC pressure and tank circuit hydraulic power pack
POWERUNIT PACKAGE to operate a single acting cylinder on any trailer ortipper application, or any single acting application complete with detachable two button pendant.
24VDC powerunit.
2.1cc/rev gear pump.
1.6kw 24VDC electric motor c/w relay and plastic motor cover. 2.5, 4.5, 7, 8, 11, 13 or 18 Litre reservoir c/w drain plug.
Powerpack complete with suction strainer, return oil conveyor and filler breather. Horizontal mounting.
Max pressure 200 bar.
Relief valve set at 160 bar but adjustable from
40-200 bar as standard.
Max flow 5 l/min.
Port size 1/4” BSP.
*Please note. Our DC power units can pull 200 amps at full load, if fusing is a requirement a 210 amp fuse should be used. A minimum 25mm2 cable at a max 5 metres In length should be used and negative cable should be in one continuous length from the battery terminating at the power unit.
Flowfit 24VDC pressure and tank circuit hydraulic power pack
24VDC powerunit.
2.1cc/rev gear pump.
1.6kw 24VDC electric motor c/w relay and plastic motor cover. 2.5, 4.5, 7, 8, 11, 13 or 18 Litre reservoir c/w drain plug.
Powerpack complete with suction strainer, return oil conveyor and filler breather. Horizontal mounting.
Max pressure 200 bar.
Relief valve set at 160 bar but adjustable from
40-200 bar as standard.
Max flow 5 l/min.
Port size 1/4” BSP.
*Please note. Our DC power units can pull 200 amps at full load, if fusing is a requirement a 210 amp fuse should be used. A minimum 25mm2 cable at a max 5 metres In length should be used and negative cable should be in one continuous length from the battery terminating at the power unit.