FREE SHIPPING
This kit will be shipped with tracking.
Kit of self-adhesive gaskets to seal the heater blower, air duct and heater. Simply peel the yellow paper and apply.
After 40+ years the original seals have decomposed.
This kit is for the later model heater as in the photos.
Build years September 1973 and later with blower part numbers
87130-60033
87130-60034
87130-60063
87130-60064
87130-60110
87130-60111
87130-60120
87130-60121
87130-60130
87130-60131
and radiator part numbers
87150-60035
87150-60036
87150-60065
87150-60066
87150-60068
87150-60069
87150-60110
87150-60111
I have more Landcruiser parts listed here:
Take
your time and prepare well. The adhesive is strong and especially the
grey soft foam needs to be applied correctly first time. No room for
error !
This kit contains:
#1 & 2 self-adhesive gaskets between the heater blower and the apron, 8mm water resistant EPDM.
Between
cars there is quiet a variance of the distance between the heater
blower and the apron. Therefor 2 gaskets are included. If 1 does not
suffice you can stack the second gasket on top of it.#3 & 4 self-adhesive gaskets for the valve, 4mm water resistant EPDM foam
#5 self-adhesive gasket between the blower and the firewall, 8mm water resistant EPDM foam
#6 self-adhesive gasket between the firewall and air duct. 4mm water resistant EPDM foam
#7 self-adhesive gasket strip between the air duct and heater. 4mm heat resistant neoprene foam.
#8 & 9 self-adhesive soft heat resistant gaskets for the top valve of the heater. This is the original set-up. You can choose to do without the gasket on the back of this valve and use the included 2 neoprene strips instead (#10 & 11). See photos.
#12 self-adhesive soft heat resistant gasket between the grey metal part and the top half of the heater.
#13 self-adhesive soft heat resistant gasket for the bottom valve of the heater
#14, 15, 16 & 17 self-adhesive gaskets for the heater core. 4mm heat resistant neoprene foam (the side with the water connections should be done first)