12V Three Phase AC 300W Wind Turbine with Five Blades, Permanent Magnet Generator including Wind Charge Controller

Turbine Specification

Generator type: Brushless Three Phase AC
High performance Neodymium magnets

Rated Power: 300W at 11 Metres a Second
Maximum Power 325W at 13 Metres a Second
Rated Voltage: 12V
Start Up Wind Speed: 3 M/S
Cut In Wind Speed: 4 M/S
Maximum RPM: 500
Slip Ring to prevent cable twist

Blade Diameter: 1.2 Metres

Weight: Approximately 8kgs

Wind Charge Controller

For charging AGM & Lead Acid batteries

Controller

FW04-12

Input Voltage

AC

Output Voltage

DC

Rated Battery Voltage

12V

Rated Wind Turbine Power. Up to

400w

Wind Turbine Braking Voltage

15V

Wind Turbine Recover Voltage

13.5

Display Mode

LED

Ambient Temperature

-35~+75℃

Dimensions (L x W x H)

150mm×87mm×28mm

Quiescent Current

≤20 mA

IP Protection Level

IP67


Listing Comprises

12V 300W AC Output Turbine

5 Nylon Blades

Blade Hub

Nuts and bolts

Front Nose Cone

User manual with installation instructions

Wind Charge Controller


Diameter of mounting pole needed: 48mm with two sets guy wires (not included)

48mm Diameter as UK scaffolding tube

Recommended height Minimum 6 Metres

Warranty: One year

Delivery

*Free UK delivery excludes: Scottish Highlands & Islands, Ireland (North & South), Isle of Man, Scilly Isles, Isle of Wight & The Channel Islands

For delivery to any of the above locations please contact Renytek Solar

Installation

Please note the wind turbine must not be installed close to high buildings or trees as these do cause turbulence which negatively affect how the turbines operates