Feature:
[Product Features]Super clear lens, dustproof and durable to withstand all weather conditions.IP65-rated water-resistant and with vent holes design in the housing to avoid moisture and fogging problems.
[Plug-N-Play installation]100% OE standard,exactly match the specifications of the original manufacturer's design.Will recommend professional installation,or watching some complete installation videos.
[Make Car Different]The old headlight assembly will become yellow and unclear, and the new headlight assembly will make your vehicle look brand new and cool.
[Quality Test]With rich experience in this industry, we attach great importance to the safe of drive, we devoted to take strict quality test for our product such as temperature test, humidity test, dust test, moisture test, etc.
[See Better Drive Safer]A good headlights allow you go home safe and reunite with family. Our reliable headlight assembly offer enhanced road illumination and improved visibility, achieve more time to react and make drive safer.
Specifications:
- Brand:KAC
- Housing Color:Black
- OE/OEM Part Number:15199557,10396913,10396912,15199556
- Other Part Number:GM2520185,GM2521185,15199557
- Interchange Part Number:10396913,GM2502257,GM2503257
- Superseded Part Numbe:GM2502257,GM2503257
- Reflctor Color:Clear
- High Beam:9005 (bulb NOT included)
- Low Beam:9006(bulb NOT included)
- Turn Signal Bulb Type: 3157A (bulb not included)
- Headlight Style:Factory
- Lens Color:clear
- Bulbs Included:No
- Certifications:DOT, SAE
- Material:ABS Plastic
Fitment:
NOTE:Not Fits Body Cladding Models
- For 03-06 For Chevrolet Avalanche 1500 2500
- For 03-06 For Chevrolet Silverado 1500 2500 3500
- For 03-06 For Chevrolet Silverado 1500 HD 2500 HD
- For 2007 For Chevrolet Silverado 1500 1500 HD 2500 HD 3500 Classic
- Fit Models without Factory Cladding ONLY
Include:
Pair Headlight
Tips:
①.Installation Guide:
1.Undo the Screws, Clips, or Retainer Springs That Hold the Headlight in Place.
2.Disconnect the Wiring from the Assembly.
3.Detach the Headlight from the Vehicle to Replace It with a New One.
4.Fit in the New Headlight Assembly.
5.Fix the New Headlight into Place and Make Sure That the Screws, Clips, or Retainer Springs Used Are Sealed.
6.Reconnect the Wiring That Was Unplugged from the Assembly.
7.Put Back the Grille and Other Components That You Removed. Seal Them Back into Place.
8.Test the New Assembly.
②.Adjustment Guide:
Before You Begin to Adjust the Light, Make Sure Check the Alignment of Your Lights First. Park the Vehicle About 10 to 25 Feet from the Wall with the Lights Aimed at the Wall. the Centerlines of the Headlights Should Not Be Any Higher than 3.5 Feet Above the Ground.
1.Find the Adjustment Screws.
Firstly, Locate the Adjustment Screws on Your Vehicle.
2.Adjust the Headlight Individually.
Adjust the Headlights Individually. the Headlights Should Be Adjusted One at a Time. Put a Rag or Towel over a Chair in Front of the Light You Want to Block. Covering the Light Assembly Directly Can Damage the Plastic Lens.
3.Adjust the Vertical Field.
The Screw on the Top of the Light Housing Should Be Turned Clockwise to Raise the Lights and Counterclockwise Will Lower the Light. the Headlight Should Be Adjusted Until the Top of the Most Intense Part of the Light Beam Shines Directly on or Just Below the Center of the Tape Line on the Wall.
4.Test Your Results.
Note:
★Ebay Compatible List Can Not Show up All Car Model, and Sometimes It May Have Mistake, and May Not 100% Accurate or out of Date.
★Please Check the Manul of Your Vechicle and Choose the Correct Good.
★If You Are Not Sure the Which Socket Your Vehicle Need.
★Please Send Us Your Car Make, Model, Year and Other Information,We Will Help to Check Which You Need.
★If You Have Any Questions, Please Do Contact Us.thank You!