Welcome to STAR DIY

Brand new - Grey Flash Mate Silicone Lead Sealant Roofing Flashing Leaks Repair Sheet

Available in any quantity

SALE - 15% OFF IF YOU BUY 4 OR MORE TUBES

A fast skinning roofing sealant that reduces weather ingression, tile lift and noise.

Flash Mate lead sealant is a high performance neutral cure silicone sealant specifically designed to be used with modern and traditional roofing products both internally and externally; it is extremely versatile and easy to use with many materials. It is a low modulus neutral cure, fast-skinning roof sealant, that is formulated to stop weather ingression, tile lift and noise and complies fully with the requirements of ISO 11600-F-25LM.

PRODUCT DESCRIPTION

A fast skinning roofing sealant that reduces weather ingression, tile lift and noise. Tough, resilient and compatible with lead.

CE Approved: Conforms to EN15651-1,2; F EXT-INT, G.

Application

Can be used to bond glass and glazing plastics as well as small sections of roofing materials under repair. Ideally suited for sealing roof-lights, conservatives, soffits, glass house, industrial roofing systems, lead flashings and to prevent tile lifting and wind noise. Also has excellent UV, heat and ozone resistance and sets to a tough, resilient rubber seal. Also suitable for use on metals, concrete, mortar and plaster.

Technical Data

A high performance neutral cure silicone sealant specifically designed for use with roofing products both modern and traditional, internally and externally. Conforms to EN15651‐1,2 F EXT‐INT, G.

Uses

Bond It FLASH-MATE is a low modulus neutral cure fast-skinning, roof sealant. It is designed to stop weather ingression, tile lift and noise. Bond It FLASH-MATE is used to seal or bond dissimilar materials to prevent weather ingression. FLASH-MATE can be used to bond glass and glazing plastics as well as small sections of roofing materials under repair. Ideally suited for sealing rooflights, conservatories, soffits, glass houses, industrial roofing systems, lead flashing and to prevent tile lifting and wind noise.

FLASH-MATE is compatible with lead, galvanised steel and all metals. FLASH-MATE has excellent UV, heat and ozone resistance and sets to tough resilient rubber.

It is ideal for use on: glass; slate; all metals including lead and galvanised steel; concrete and brick; GRP; sealed timber; plastics (including polycarbonate); acrylics; PVCu and all painted surfaces.

Preparation

Ensure all surfaces are clean, dry and free from grease or any contaminants that may hinder adhesion. Priming may be necessary on porous surfaces.

Application

Apply using a standard sealant gun with the nozzle cut at an angle of 45°C, and to an opening slightly larger than the joint to be sealed. Best tooling is achieved if a minute or two is allowed after application before smoothing. Polyethylene foam backing rod pushed into construction joints before sealing gives a technically superior joint and minimises sealant consumption. For bonding press the two surfaces together before skinning commences. On very hot roofs skinning time will be much shorter.

Once the silicone has been applied and tooled rain will not have any adverse effects on the sealant.

Tools can be cleaned in WHITE SPIRIT or Bond It MULTI-WIPES prior to curing taking place.

Limitations

Porous surfaces should be primed first. Do not use on surfaces where water can penetrate through porous materials to the bond interface without first carrying out remedial work. Not suitable for use on natural stone.

Container Size

EU3 plastic cartridge.

Colours

FLASH-MATE is available in grey only.

Shelf Life

Minimum 12 months from date of manufacture when stored in unopened tubes.

Storage Conditions

Store in cool, dry conditions at a temperature between 5-25°C.

Disposal of Containers

Do not leave empty containers where residue could be harmful to children, animals or the environment. Remove any containers to a central disposal point in accordance with local regulations.

Note: this information is for general guidance only, since site conditions and labour are beyond our control. It is recommended that users make their own tests to determine suitability.

FEEL FREE TO CONTACT US FOR MORE TECHNICAL DATA/DETAILS

BUY MULTIPLE QUANTITY FOR EXTRA SAVINGS

The majority of items arrive to the customer within 3 working days of dispatch, however this is just an estimate and delivery may take up to 5 days, particularly during peak periods.

We use a variety of proven couriers depending on weight and size. Please note eBay's delivery dates are estimates only and not guaranteed. If you require any products urgently we recommend sending us a message to confirm delivery details.

Contact number: 07557402434.