How To Use:

To Add Another Transponder Key

1. Flip switch on the programmer to the LEFT.
2. Close all doors.
3. Insert the original key into the ignition and turn the key to the ON position.
4. Insert the programmer into the OBD2 port. The programmer will beep twice indicating the beginning of the programming process. After a short pause, the programmer will beep several more times and the vehicle's anti-theft light will illuminate.
5. Once the anti-theft light turns on, remove the customer's original key (anti-theft light will flash) and insert the new key into the ignition (DO NOT TURN KEY). Anti-theft light will extinguish when key has been programmed.

To Program New Remote

1. Flip switch on the programmer to the RIGHT.
2. Close all doors.
3. Insert the original key into the ignition and turn the key to the ON position.
4. Insert the programmer into the OBD2 port. The programmer will beep twice indicating the beginning of the programming process. After a short pause, the programmer will beep several more times and the vehicle's anti-theft light will illuminate.
5. Open the driver's door. The programmer will begin beeping.
6. Press both the LOCK and UNLOCK buttons at the same time on the new remote.
7. Release both buttons.
8. Press the LOCK button.