Are you looking for the ultimate in precision shifting and feel? Want to eliminate all slop in the shifter for that tactile mechanical feel and satisfying shift? Look no further than the Garagistic Solid Chassis Mounted Short Shifter! The Garagistic Solid Short Shifter requires no permanent modification to install and is the ultimate short shifter for your BMW! The shifting experience becomes tight, precise, and tactile, providing a definite feeling coming in and out of each gear. This aids in driver confidence and precision shifting especially when in a stress or race environment! The Garagistic Chassis Mounted Short Shifter is made from solid billet aluminum and is available with a variety of stalk lengths and shift knob options. Customize your shifter just to your taste with the Garagistic Chassis Solid Mounted Short Shifter!
This shifter must be run with poly or solid upgraded transmission bushings.
This shifter is highly recommended to be paired with a Garagistic DSSR to provide the most direct shifting experience possible.
Please note: Because this shifter is straight (not bent/curved like most BMW OEM shifters), some applications may require a custom-length DSSR. If you are unsure what length you will need, reach out to us and we will help you figure that out! We have over 80 configurations of DSSR's, so it is crucial to include the last 7 of your VIN for us to reference and assist us in determining which DSSR is appropriate for your application.
FEATURES AND SPECS
- Solid Billet aluminum construction
- precision spherical bearing pivot point
- No permanent modifications are required for installation!
- Available with Medium Rod Length
- Availble with Standard Delrin Knob
- Available with OEM style slot rod for compatibility with BMW OEM shift knobs (select OEM height option)
- 6 Flat Socket Bolts (top plate retaining bolts)
- 7 Thumb Alen Bolts (Bottom plate retainer bolts)
- 4 Small Set Screws (2 screws for shifter rod, 2 screws for lower rod)
FITMENT: WILL THIS SHIFTER FIT MY CAR?
- Not compatible with iX AWD E30
- Short option not recommended for E36 and up chassis
- Will fit on round transmission tunnel holes between 3 1/4" - 3 3/8" diameter
- Fits most BMW chassis such as E30, E36, E46, Z3, E39, E34, and many more (some very early model cars will require some modification to the opening in order to properly install the shifter. Please check the opening size based on the dimensions provided above.)
- 1984 - 1985 E30 Models have a smaller diameter hole in the trans tunnel for the shifter. This will require you to remove enough material to increase the diameter of the hole in the trans tunnel with a Dremel for proper installation.
- Please Note: Some OEM BMW shifter rods have a very slight tilt, therefore some shifters will also have a slight tilt once installed.
FITMENT: WHICH SIZE ROD SHOULD I GET FOR MY CAR?
- This listing is only for the Medium rod. All other variations are not sold on eBay.
We currently have all components in stock to make these. However, These are very custom and have tons of configurations. In fact, there are nearly 676 different configurations possible. It's not possible to have every combo pre-made ready to go. Each one gets hand-assembled to each customer's specs. Shipping lead time on shifters is around 1 week from order to shipment. Please do not call/email within 30 seconds of placing the order to check status. These are worth the wait, we promise!
Due to high demand, in an effort to keep orders going out in as timely a manner as possible we can not take custom requests outside of our preconfigured options. This listing is only for medium sized rod, on delrin standard knob. Not for anything else pictured. All other knobs or lengths pictured are for demonstration purposes only. Those variations are not available on eBay and it will not be the variation you are purchasing for in this listing.
Please leave Year and model in the notes on checkout!
Please look at the pictures it shows you exactly what you get and the condition. We try to describe the items as much as we can but pictures are the best way to describe an item!
GARAGISTIC SOLID MOUNTED SHORT SHIFTER
Are you looking for the ultimate in precision shifting and feel? Want to eliminate all slop in the shifter for that tactile mechanical feel and satisfying shift? Look no further than the Garagistic Solid Chassis Mounted Short Shifter! The Garagistic Solid Short Shifter requires no permanent modification to install and is the ultimate short shifter for your BMW! The shifting experience becomes tight, precise, and tactile, providing a definite feeling coming in and out of each gear. This aids in driver confidence and precision shifting especially when in a stress or race environment! The Garagistic Chassis Mounted Short Shifter is made from solid billet aluminum and is available with a variety of stalk lengths and shift knob options. Customize your shifter just to your taste with the Garagistic Chassis Solid Mounted Short Shifter!
This shifter must be run with poly or solid upgraded transmission bushings.
This shifter is highly recommended to be paired with a Garagistic DSSR to provide the most direct shifting experience possible.
Please note: Because this shifter is straight (not bent/curved like most BMW OEM shifters), some applications may require a custom-length DSSR. If you are unsure what length you will need, reach out to us and we will help you figure that out! We have over 80 configurations of DSSR's, so it is crucial to include the last 7 of your VIN for us to reference and assist us in determining which DSSR is appropriate for your application.
FEATURES AND SPECS
- Solid Billet aluminum construction
- precision spherical bearing pivot point
- No permanent modifications are required for installation!
- Available with Medium Rod Length
- Availble with Standard Delrin Knob
- Available with OEM style slot rod for compatibility with BMW OEM shift knobs (select OEM height option)
- 6 Flat Socket Bolts (top plate retaining bolts)
- 7 Thumb Alen Bolts (Bottom plate retainer bolts)
- 4 Small Set Screws (2 screws for shifter rod, 2 screws for lower rod)
FITMENT: WILL THIS SHIFTER FIT MY CAR?
- Not compatible with iX AWD E30
- Short option not recommended for E36 and up chassis
- Will fit on round transmission tunnel holes between 3 1/4" - 3 3/8" diameter
- Fits most BMW chassis such as E30, E36, E46, Z3, E39, E34, and many more (some very early model cars will require some modification to the opening in order to properly install the shifter. Please check the opening size based on the dimensions provided above.)
- 1984 - 1985 E30 Models have a smaller diameter hole in the trans tunnel for the shifter. This will require you to remove enough material to increase the diameter of the hole in the trans tunnel with a Dremel for proper installation.
- Please Note: Some OEM BMW shifter rods have a very slight tilt, therefore some shifters will also have a slight tilt once installed.
FITMENT: WHICH SIZE ROD SHOULD I GET FOR MY CAR?
- This listing is only for the Medium rod. All other variations are not sold on eBay.
We currently have all components in stock to make these. However, These are very custom and have tons of configurations. In fact, there are nearly 676 different configurations possible. It's not possible to have every combo pre-made ready to go. Each one gets hand-assembled to each customer's specs. Shipping lead time on shifters is around 1 week from order to shipment. Please do not call/email within 30 seconds of placing the order to check status. These are worth the wait, we promise!
Due to high demand, in an effort to keep orders going out in as timely a manner as possible we can not take custom requests outside of our preconfigured options. This listing is only for medium sized rod, on delrin standard knob. Not for anything else pictured. All other knobs or lengths pictured are for demonstration purposes only. Those variations are not available on eBay and it will not be the variation you are purchasing for in this listing.
Please leave Year and model in the notes on checkout!
Please look at the pictures it shows you exactly what you get and the condition. We try to describe the items as much as we can but pictures are the best way to describe an item!
SHIFT KNOB INCLUDED
Comes with a Standard Delrin knob.
Read More
QUALITY ENGINEERING
Our solid shifters are engineered with top of the line manufacturing methods. With solid billet aluminum construction, precision spherical bearing pivot points, and top of the line hardware.
Read More
HIGHLY MODULAR
Have it your way with your build. We have nearly 676 different configurations possible with different rod lengths, shift knobs, emblems, and finishes for every kind of car!
Read More
BETTER PAIRED WITH THE FOLLOWING PRODUCTS
DSSRS
Pair our shifter with our DSSR! Going to a DSSR will mean less play in your shifter, with a more precise shift every time.
TRANNY BUSHINGS
Get less movement under braking and cornering, moreover, will not transfer much noise into the cabin which will make the ride a bit easier.
SELECTOR JOINTS
This new design will allow you to snug the DSSR down on the selector joint without any binding and further eliminates any slop in the shifter.
Payments can be made via the payment methods on the eBay platform. We accept PayPal, and most credit/debit cards that can be processed on this platform. No shipments will be arranged until payment is successfully processed. Please refer to our returns & exchanges policies for details on any returned payments.
Shipping fees are the responsibility of the buyer unless otherwise specified. Shipping across the continental United States may vary across states. All shipping rates are calculated from the live rates of each carrier that is used. Please be aware that we do not control these rates, and these rates are subject to the live supply/demand of the freight containers/pallets at any given time. International orders may incur higher shipping rates depending on the region and carrier selected.
Large/oversized items may have an extra fee to process. Please double check all shipping rates before purchasing.
Garagistic is committed to 100% customer satisfaction! If you are unsatisfied with your purchase, you may return your purchase within 30 days of the ship date STILL IN ITS ORIGINAL PACKAGING. WE DO NOT ACCEPT RETURNS ON ANY USED OR INSTALLED PARTS. Some items will be subject to a 20% restocking fee, as well as any order returned after 30 days. We do not accept returns on clearance items. All clearance items are final sale and the buyer is responsible for confirming fitment of any application outside of stock configuration. We do not accept returned customized or made-to-order items such as chassis mount shifters, supreme OEM shifters, driveshafts, wiring harnesses, engine mounting kits, roll bars etc (please contact us if you are unsure if you part falls under this category）
We do not refund shipping costs. We reserve the right to refuse a return on any orders after 30 days. On returns authorized past 30 days from purchase we reserve the right to give store credit instead of a refund (please reach out to confirm). We absolutely do not accept used or damaged items for return. It is your responsibility to make sure that returned items arrive to us in good condition please pack your items accordingly. We reserve the right to refuse a return on any items not authorized before hand. It is the customers responsibility to arrange return shipping for any items that are rejected through the return process.
If you have some thoughts about how we can better improve your customer experience, please leave us a feedback on our eBay store! This helps us improve our customer and product experience, we'd greatly appreciate it!
