2Pcs 7/8" inch 22 mm Diamond Coated Hole Saw Drill Bits for Stone Granite Marble Ceramic

Product Specification

Product Name:  Diamond tip masonry bit, Stone cutting bits

Outside Diameter :  22mm (close to 7/8") 

Inner Diameter:  19.2mm

Shank diameter: 8mm (5/16")

Total length:  65mm

Drill depth: 29mm depth

Quantity:  2Pcs

Features:

Brand New & High Quality

Easy to use, Good Performance and long life

Excellent for making clean and accurate hole on stone, granite, marble, tile

Works better with a electric drill( Excluding in this item )

Drilling speed: Drill a hole in seconds

Use with water as a lubricant

Quick Tips

1. Please add water for coolant and drill slowly

2. Start drill at 45 Degree to surface and align to 90 Degree as hole forms

3. Never use drills while machine is in hammer action.

4. Holes Require No Futher Work As Cutting Is Clean

Just a friendly reminder: Please add the water to cool the drill bit while drilling hole process

The Diamond Hole Saw Does NOT Have Center Pilot Drill

There is no need for a Pilot Drill Bit, because pilots are not safe for glass/stone.

How to use a hand drill to drill holes in the glass/tile/stone?

Step 1. The bit on the glass/tile/stone 45 degree, open a half-moon notch on it

Step 2. Slowly up the bit to 60 degrees, and then gently drill

Step 3. Reached 90 degrees, continue to drill

Step 4. Drill through the glass/tile/stone finally, the technique requires a “wobble” of the drill rather that steady pressure straight on

We will send out your order within 1-2 days after payment has been received and cleared 

Please let us know if you are looking for other accessories or hardware. 

We Can List Any Size( Hole Diameter from 6mm - 200mm) & Amount Of This Product