PU pp-r pe Round Belt Electric Connector Fuser Polyurethane Strips Bonding Machine Welding Machine Hot Melt PU Belt Heater
Parameters:
Conditions of use:
The altitude does not exceed 1000 meters
Ambient temperature: -20°C~50°C
Relative humidity: 45%~95%
Voltage range: AC 176V-245V/50±1Hz
Safety indicators:
Insulation resistance is not less than 1MΩ
Leakage current: ≤ 5mA (AC RMS)
Instructions:
Before using the machine, check whether the machine part is intact, install the temperature switch
Then turn on the power, the green indicator light is on
The corresponding tick mark adjusts the temperature to about 150°C, the red light is on
At this time, the temperature rises and the temperature is reached, the red light is extinguished when required, indicates that the machine enters the automatic control state and can start operation
Note:
During use, hands and flammable materials should not touch the hot melt
If it is red, the green indicator light will not change for a long time, indicating that the machine is faulty, stop working immediately, and cut off the power
The temperature of the machine has been adjusted at the factory, non-professionals are not allowed to adjust at will, so as not to affect the normal use and life of the machine
The round band in the picture is not included and is for display purposes only