










USA Seller, Ship Worldwide
Our products and service will speak for themselves!
Condition: 100% Brand New
Product Name:Tire Pressure Sensor
Fitment Type: Direct Replacement
Model: For BMW
Quantity: 4pcs
Color: Yellow
36106790054, 36106856227, 36116856227 36106874829
Please make sure the interchange part number matches the part you are replacing.
Please check our photos and make sure the part shown looks identical to your stock one.
For BMW 1
E88 (09/2010 - 10/2013)
E82 (09/2010 - 10/2013)
For BMW 3
E90 LCI (09/2009 - 12/2011)
E91 LCI (09/2009 - 05/2012)
E92 LCI (09/2009 - 06/2013)
E93 LCI (09/2009 - 10/2013)
For BMW 5
F07 GT (09/2010 - 06/2013)
F07 GT LCI (09/2010 - 03/2014)
F10 (09/2010- 06/2013)
F10 LCI (08/2012 - 03/2014)
F11 (09/2010 - 06/2013)
F11 LCI (08/2012 - 03/2014)
For BMW 6
(05/2011 - 03/2016) F06 Gran Coupé
F12 (10/2009 - 02/2015)
F13 (03/2010 - 02/2015)
For BMW 7
F01 (09/2010 - 06/2012)
F01 LCI (05/2011 - 03/2014)
F02 (09/2010 - 06/2012)
F02 LCI (05/2011 - 03/2014)
(09/2010 - 06/2012) F04 Hybrid
For BMW X1
E84 (09/2008 - 03/2014)
Fro BMW X3
F25 (06/2009 - 03/2014)
For BMW X4
F26 (05/2013 - 03/2014)
For BMW X5
E70 LCI (10/2010 - 06/2013)
For BMW X6
E71 (10/2010 - 03/2014)
For BMW Z4
E89 (01/2008 - 03/2014)
For BMW MINI
R56 (09/2009 - 08/2010)
R56 LCI (03/2009 - 11/2013)
Clubman R55 (03/2009 - 07/2010)
(03/2009 - 03/2014) Clubman R55 LCI
Cabrio R57 (04/2009 - 07/2010)
Cabrio R57 LCI (04/2009 - 03/2014)
4 x TPMS Tire Pressure Sensor
You will receive exactly what you see on the picture
Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.

