Solar Air Heater (OS22)

Solar air heater operates by taking in air from the room and through a special construction inside the panel. The air is heated by the sun several times absorb the heat energy and then delivered back into the room.

The heated air is blown into the house by a fan powered by the built-in solar panel. The solar air heater is temperature controlled so the fan turns off when a pre-set temperature is reached.

It helps to offset the heating cost up to 50%. Easy installation and maintenance free make it one of the most attractive methods for providing heat in the winter.

Features:

·         Free heating, lower heating cost, decrease your heating bill significantly.

·         Standalone heating system – with integrated solar panel, there is no need to connect any external power to the fan.

·         Maintenance free, system life more than 15 years.

·         Temperature control – comes with thermostat to set the temperature.

·         Environmental friendly, no pollution.

·         High efficiency and maintenance free – as an independent system, there is no need to connect an existing heating or electrical network. It can work continuously during the day.

·         Safety – no household electricity required, no heating fuel, less chance of fire.

·         Fresh air – can choose fresh air from outside or air circulation within the room.

·         Reduced work load on the conventional heating system which lower the heating and maintenance cost.

      Low iron patterned solar tempered glass, up to 92% transmittance

          Space coverage:    450 sq. ft.

          Max. air flow rate:   57 CFM

          Dimension:             40" x 29" x 2.5"

          Weight:                   38 LBS

         Solar air heater installation:

1.   1. Highly recommend to install it on a south facing wall outside (south-east, south-west work as well). The sun is low in winter. It is perfect on the wall where there is no snow covering. Make sure there are no trees or any shading on the panel. The built-in fan does not run if the panel is shaded. Do not install on the existing window.

2.   2. If roof mounted, install at a deep angle 45 to 65 degree.

3.   3. Make 2 holes of 4” diameter on the wall.

4.   4. Install the duct and vents provided. Insulated the duct if needed.

5.   5. Mount the panel and connect the thermostat provided.

*     *Ship by UPS /  Purolator / Canpar. Shipping to rural address may be higher.

       Ship to Canada and lower 48 states in US.

d