This grouped listing covers ready-made 50 Ohm RF cable assemblies with an SMA plug on one end and an N plug on the other. It is intended for buyers who need a flexible low-loss lead to bridge SMA-interface devices to N-interface infrastructure such as antennas, amplifiers, filters, and surge protectors.
The assemblies use flexible 200 Series low-loss coax in the CLF200 / LMR200 size class. At approximately 5 mm diameter, this cable is lighter and more flexible than heavier 400 Series, making it easier to route in tight spaces and indoor installations.
200 Series cable offers approximately 0.6 dB loss per metre at 2.5 GHz. This makes it well suited to short-to-medium RF links where a lighter, more manageable cable is preferred over a heavy feeder. Select the required finished length from the variation options.
The SMA-to-N combination is one of the most common mixed-interface RF cable assemblies, typically used to connect SMA-equipped radios, modules, or development boards to N-type antennas, couplers, or test equipment.
| Product family | A30N30-200 cable assemblies |
| Connector 1 | SMA plug, straight, standard polarity, male pin |
| Connector 2 | N plug, straight, standard polarity, male pin |
| Cable type | 200 Series low-loss flexible coax |
| Cable compatibility | CLF200 / LMR200 size class |
| Impedance | 50 Ohm |
| Cable diameter | Approx. 5 mm |
| Approx. loss | 0.6 dB per metre at 2.5 GHz |
| Available lengths | 700 mm, 2 m, 3 m, 5 m, 10 m |
| Country of origin | UK |
Before ordering, confirm that one mating port is a standard SMA jack and the other is a standard N jack, and that your system is 50 Ohm. Each variation is a complete SMA plug to N plug cable assembly rather than loose components.