| Bandwidth | 50MHz |
| Sample Rate | 500MS/s |
| Horizontal Scale (s/div) | 2ns/div~1000s/div, step by 1~2~5 |
| Rise Time (at the input, typical) | ≤7.0ns |
| Channel | 2 |
| Display | 7 inch TFT LCD, 800*480 pixels |
| Input Impedance | 1MΩ ± 2%, in parallel with 20pF±5pF |
| Channel Isolation | 50Hz : 100 : 1, 10MHz : 40 : 1 |
| Max Input Voltage | 400V (PK - PK) (DC+AC, PK - PK) |
| DC Gain Accuracy | ±3% |
| Record Length | 10K |
| DC Accuracy (average) | Average≥16:±(3% reading+0.05 div) for delt V |
| Probe Attenuation Factor | 1X, 10X, 100X, 1000X |
| LF Respond (AC, -3dB) | ≥10Hz (at input, AC coupling, -3dB) |
| Sample Rate / Relay Time Accuracy | ±100ppm |
| Interpolation | sin (x) / x |
| Interval (delt T) Accuracy (full bandwidth) | Single:±(1 interval time+100ppm*reading+0.6ns) Average>16:±(1 interval time+100ppm*reading+0.4ns) |
| Input Coupling | DC, AC, and GND |
| Vertical Resolution (A/D) | 8 bits (2 channels simultaneously) |
| Vertical Sensitivity | 5mV/div - 5V/div (at input) |
| Trigger Type | Edge, Video |
| Trigger Mode | Auto, Normal, and Single |
| Trigger Level | ±5 divisions from screen center |
| Line / Field Frequency(Video) | NTSC, PAL and SECAM standard |
| Cursor Measurement | delt V, and delta T between cursors |
| Automatic Measurement | Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot,Pre-shoot, Rise time,Fall time,+Width,-Width,+Duty,-Duty,Delay A→B↑,Delay A→B↓,+Pulse Count,-Pulse Count,Rise Edge Count,Fall Edge Count,Area,Cycle Area |
| Waveform Math | +, -, x, ÷, invert, FFT |
| Waveform Storage | 16 waveforms |
| Communication Interface | USB host, USB device |
| Frequency Counter | available |
| Power Supply | 100V~240V AC, 50/60Hz, CAT II |
| Power Consumption | <15W |
| Fuse | 2A, T class, 250V |
| Dimension (W*H*D) | 301mm*152mm*70mm |
| Device Weight | 1.10 kg |