Model
Brand Kingston
Series SSDNow E100
Model SE100S37/200G
Details
Form Factor 2.5"
Capacity 200GB
Interface SATA III
Performance
Max Sequential Read Up to 535 MB/s
Max Sequential Write Up to 500 MB/s
4KB Random Read Up to 59,000 IOPS
4KB Random Write Up to 73,000 IOPS
MTBF 10,000,000 hours
Features
Features Sustained Random 4k Read/Write: 59,000/72,000 IOPS
Enterprise SMART Tools Reliability Tracking, Usage Statistics, Life Remaining, Wear Leveling, Temperature, Drive Life Protection
It is strongly recommended that this drive NOT be used as a single boot drive. These drives are designed to be used in a RAID configuration in a server environment. If you intend to use this drive as a single boot drive, you MUST disable the TRIM function otherwise drive instability and data loss is likely to occur. This problem will not occur if the drive is configured in a RAID. TRIM commands cannot be sent to the drive when SSDs are in a RAID configuration. We are working on a firmware update to resolve this problem.
In the meantime, if you are using it as a single boot drive, you can disable TRIM. To disable the TRIM command in Windows 7 and Server 2008, type the following and press enter in the Elevated command: fsutil behavior set disabledeletenotify 1
In Linux, TRIM must be enabled manually. In Mac OS, TRIM is only supported with Apple branded drives.
Environmental
Power Consumption (Idle) 0.5W
Power Consumption (Active) 3.1W
Operating Temperature 0°C ~ +70°C
Storage Temperature -40°C ~ +85°C
Dimensions & Weight
Height 7mm
Width 69.85mm
Depth 100