Important Notes
This listing is for SPACERS ONLY. NO LUGS INCLUDED. Extended Wheel Studs or Extended Lug Bolts may be Required. Buyers are responsible for having these for proper installation.
Important Safety Advisory
As with any component you purchase for your vehicle, installation should be done by a qualified technician. We've provided the following information as a general
reference for purchasing and installing these spacers/adapters. The following list isn't all-inclusive and may be different depending on the vehicle you drive,
type of wheels you have, and ideal setup you're trying to achieve. Failure to install properly may cause your
lug nuts/bolts/spacers to loosen or break while driving. If you are not confident or familiar with the installation, please ask a trained professional for help.
Before Purchasing
- Measure your wheel gap for clearance. You will need at least 5mm of clearance to prevent the wheel/tire from hitting the fender or fenderliner.
Before Installation
Check compatibility of spacer-to-hub, spacer-to-wheel, and lugs (thread pitch, seat type, shank length)
During Installation
- Installation should be performed by a trained professional using proper tools.
- Avoid using an impact wrench or any pneumatic tools; improper usage may cause damage to components.
- Ensure proper thread engagement. Typically, its a minimum of 5-8 turns before the lug nuts/bolts tightens, however, it varies depending on thread pitch and type of vehicle.
- ALL Lug Nuts/Bolts MUST be torqued to manufacture specifications.
After Installation
- Test drive your vehicle to ensure the hardware is installed properly. Pay close attention for any noises, vibrations, or compatibility issues (such as fender rubbing).
- Inspect and re-torque ALL Lug Nuts/Bolts after 25-50 miles of driving
Note: No returns or exchanges once product has been installed on the vehicle.
Legal Information
Note: This is an aftermarket component. The trademarks used in this listing are registered trademarks of their respective owners, and are used only to identify the vehicles to which this part fits.
