753 763 773 7753 S130 

   ONLY THOSE WITH 1.5" 38.1 mm OD TAPERED PIVOT PINS with 3/4 " 0.75 BOLTS

                  AND LISTED IN THE BELOW SERIAL NUMBERS

                       BEWARE ! THESE LISTED MACHINES MAY ALSO HAVE 

            1.25 " 31.8 mm OD TAPERED LOWER PIVOT PINS AND  5/8 " 0.625 BOLTS

                         WHERE THE BOBTACH ATTACHES TO THE LOWER ARMS !

                          CHECK YOUR TAPERED PIVOT PIN OD OR BOLT SIZE   !!!

  BEWARE ! SOME SERIAL NUMBERS MAY HAVE THE GREASE NIPPLE IN THE END

                     OF THE TILT CYLINDER PIVOT PIN . CHECK YOUR PIVOT PIN 

      with the serial numbers within the below list  use these parts...

          

753  SN 512211001 - 512211999, 

         with 1.5" 38.1mm OD 3/4" Bolt in the Tapered Pivot Pin 

             NOTE ! if the Tapered Pivot Pin is 1.25" 31.8 mm OD and has a 5/8" Bolt  

                                and your machine is in the above serial numbers 

                                   you require the 6732012 Tapered Pivot Pin Kit 

                  NOTE ! If your Tilt Cylinder Pivot Pin has a grease nipple in the end

                                of the Pivot Pin you require the 6705223 Pivot Pin  

763  SN   512214107 & Above,    all use this kit 

                      512440232 & Above,   all use this kit 

                         512612001 & Above,    all use this kit 

                 

773  SN 509616196 - 50963499,   all use this kit 

                       509636916 & Above,   all use this kit 

               NOTE !  If your Tilt Cylinder Pivot Pin has a grease nipple in the end

                               of the Pivot Pin you require the 6705223 Pivot Pin  

                             

7753  SN 509611001 & Above,

       with 1.5" 38.1mm OD 3/4" Bolt in the Tapered Pivot Pin 

           NOTE ! if the Tapered Pivot Pin is 1.25" 31.8 mm OD and has a 5/8" Bolt  

                               and your machine is in the above serial numbers 

                                you require the 6732012 Tapered Pivot Pin Kit 

                NOTE ! If your Tilt Cylinder Pivot Pin has a grease nipple in the end

                               of the Pivot Pin you require the 6705223 Pivot Pin  

S130 SN 527311001 & Above, 

                 with 1.5" 38.1mm OD 3/4" Bolt in the Tapered Pivot Pin 

S130 SN 527411001 & Above, 

                  with 1.5" 38.1mm OD 3/4" Bolt in the Tapered Pivot Pin 

S130 SN A00E11001 & Above,   

                  with 1.5" 38.1mm OD 3/4" Bolt in the Tapered Pivot Pin 

             NOTE ! if the Tapered Pivot Pin is 1.5" 31.8 mm OD and has a 5/8" Bolt  

                               and your machine is in the above serial numbers 

                                 you require the 7101078 Tapered Pivot Pin Kit 

  fits Bobcat ® Track Loaders ... 

                       

                                            T140 

 

            WITH 1.5" ( 38.1 mm ) OD TAPERED PIVOT PINS AND 3/4 " 0.75 BOLT 

     

  

      with the serial numbers within the below list  use these parts...

T140  SN 527111001 & Above,  

                   with 1.5" 38.1mm OD 3/4" Bolt in the Tapered Pivot Pin

T140  SN 527211001 & Above, 

                    with 1.5" 38.1mm OD 3/4" Bolt in the Tapered Pivot Pin 

            NOTE ! if the Tapered Pivot Pin is 1.5" 31.8 mm OD and has a 5/8" Bolt  

                               and your machine is in the above serial numbers 

                                 you require the 7101078 Tapered Pivot Pin Kit