|
VALVE COVER GASKETS - SILICONE for LYCOMING R-680 SERIES - Our silicone rubber gaskets are made
from aerospace mechanical grade AMS silicone and designed to withstand
temperatures up to 400 degrees
Fahrenheit. - Therefore, they will not break down
and deform or crack up like cork or
neoprene. - Our gaskets seal uneven
and warped surfaces and eliminate
corrosion.
- Gaskets are 100% reusable. Fits: Lycoming R680 Series These gaskets are FAA-PMA approved PART #: RG-1843 OEM#: 1843 Silicone gasket thickness is 1/16". Gaskets are sold individually 18 gaskets make a set Reusable INSTALLATION INSTRUCTIONS: FOLLOW INSTRUCTIONS ON THE LABEL. Wash all surfaces with solvent. Remove all traces of
oil. The gasket must be
installed DRY (No oil or lube of any type). TORQUE TO 8 to 12 INCH
POUNDS. CAUTION - DO NOT OVER-TIGHTEN! Over tightening causes the gasket to bulge out or squeeze out. If that happens, then back off on the torque. TO REUSE GASKETS: Wash gaskets briefly in hot soapy water. Rinse well and dry all surfaces. Re-install using the above installation instructions. Proudly made in the USA. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USE CORK? GET REAL! REAL Gaskets that is… REAL Gaskets for aircraft, automobile, and motorcycle engines. Our silicone rubber gaskets are made from aerospace mechanical grade AMS silicone, designed to withstand temperatures up to 400 degrees Fahrenheit and to last the life of the engine. Our gaskets seal uneven surfaces, eliminate corrosion and are 100% reusable. We manufacture valve cover gaskets for: Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and Wright radial piston aircraft engines. Automobiles: Ford, GM, Mopar, Porsche and VW automobile engines. Motorcycles: BMW, Harley-Davidson, Suzuki, BSA, Ducati, Moto Guzzi, Norton, Triumph, Saab and most other motorcycle engines. If you are tired of oil leaks, then a silicone rubber gasket is the only way to go, and REAL Gaskets Tennessee is the only place you can get “The Original” silicone rubber gasket. MADE IN THE |