110V Automatic Twist Tie Machine
https://topseller365.com/data/prd/020/123/196_(1).jpg
Product Overview
The automatic tying machine produced by our company applies to tying the cable, toy and other polybag etc. The machine use PLC program control, text monitor for parameter setting, easy to operate. Just put the product on the binding location, the machine can automatically tie the wire.
Product Parameters
Power 120W
Voltage 110V
Bundling diameter 0.12 - 1.26in(3-32mm)
Tying Cable length 2.36 - 5.51in(60-140mm)
Wire tying speed 0.5s/times
Number of coils: 0-20(adjustable)
https://topseller365.com/data/prd/020/123/chicunaaa.jpg
Attention

1.Do not place other small objects on machine, in order to avoid the machine to cause mechanical card dead and electrical short circuit;

2.Please clean the scrap of the cutting knife parts every day (Wind gun blows), and Spray lubricant or anti-rust oil at the cutter area;

3.Please do not modify the inner wiring layout, failure will occur;

4.When a device fails, turn off the power switch immediately;

5.During machine operation, do not put your hand in the rotation position and binding position, avoid hurting your hands;

6.Part of the metal parts of the machine regularly sprayed anti-rust protection
Product Features
https://topseller365.com/data/prd/020/123/752a62d84e445d50bbb0696a272029d6_720.jpg 　 https://topseller365.com/data/prd/020/123/11111.jpg
Specially designed bracket

with stainless steel bearings added to the zip tie bracket to reduce zip tie resistance and ensure smoother feeding.

 　 Simple operation panel

Display in both Chinese and English
Operation Method

1. Preparation

Install the wire reel on the holder, turn on the power, open the door on the right, manual delivery the tie, make the tie through the hole of the tie track, the tie must be straight and not twisted. Place the tie between the upper and lower gears,then click the feed key until the tie through the cutter track and feed out.Then set parameters such as wire length, twist coils number in the display, try tying several times to see the effect, until set to satisfactory effect can be mass produced. If need to replace the new tie, please turn off the power, and pull out the remaining tie before installing the new tie. The applicable tie diameter of the machine is within 4MM, and the diameter of the iron core is 0.45MM below, if out of the range will affect the effect. The diameter of the product should be within the range of the place area, and the range of different models is different, which should be confirmed before purchase.

2. Parameter setting

(1)Start the power switch, the screen display as belows:

https://topseller365.com/data/prd/020/123/2087244a071e851a34f4625c774b56c6.png

(2)Click Enter key to enter the arameter setting as belows:

https://topseller365.com/data/prd/020/123/8960f31f387bdceeb8e59c01d26a46af.png

Tying count: quantity of the tying.

Tie length: unit is mm, the length is based on the diameter of the tied product.

Twist coils: meaning the coils of twist the wire ends, advise 5 below.

Start delay: meaning the delay time after the switch is started.

Click ‘parameter’ key to enter the factory debugging screen, this function needs to enter the password, users are not recommended to change, machine abnormal debugging, please under the guidance of the manufacturer.

(3)Click ‘Manual’ key to next page, the parameter in this page no need to adjust in normal.

https://topseller365.com/data/prd/020/123/331dd08404862883c64d3d7b68da1922.png

If the actual length is inconsistent with the set length, you can enter the actual length and click calibrate.

Inlet wire: click to manually feed the wire

Outlet wire: click to tie the wire back

Kink test / feed test / hook test: click and the machine start the corresponding action

Binding ration: input the output quantity, after reaches the output, the machine sounds an alarm, the number 0 is not set the output.

(4)After all parameter settings are completed, place the product that needs to be wired into the cable tie port.
Product Display
https://topseller365.com/data/prd/020/123/196_(2).jpg https://topseller365.com/data/prd/020/123/196_(9).jpg
https://topseller365.com/data/prd/020/123/196_(13).jpg https://topseller365.com/data/prd/020/123/196_(3).jpg
Item Number (022831): 1 x Garlic Root and Stalk Cutting Machine 110V

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.

On Jan 14, 2026 at 22:48:27 PST, seller added the following information:

Datacaciques