Features:
• 100MHz bandwidths
•1GSa/s Real Time sample rate
• Large (7.0-inch) color display,WVGA(800x480)
• Record length up to 1M
• Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
• USB host and device connectivity, standard
• Multiple automatic measurements
• Four math functions, including FFTs standard
Model | DSO5102B | ||
Bandwidth | 100MHz | ||
Real-time Sample Rate | 1GSa/s | ||
Equivalent Sample Rate | 25GSa/s | ||
Record Length(Sample Points) | Single-channel: Maximum 1M; Dual-channel:Maximum 512K (4K,16K,40K optional) | ||
SEC/DIV Range | 4nS/div-40S/div (in a 2, 4, 8 sequence) | ||
Delay Time Accuracy | 500ps | ||
Vertical | |||
A/D Converter | 8-bit resolution, each channel sampled simultaneously | ||
VOLTS/DIV Range | 2mV/div～5V/div at input BNC | ||
Position Range | ±50V(5V/div),±40V(2V/div～500mV/div),2V(200mV/div～50mV/div)±400mV(20mV/div～2mV/div) | ||
Rise Time at BNC | ≤3.5ns | ||
DC Gain Accuracy | ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div | ||
Trigger | |||
Trigger Sensitivity (Edge Trigger Type) | DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full EXT（Typical） 200mV from DC to 40MHz EXT/5（Typical） 1V from DC to 40MHz AC: Attenuates signals below 10Hz HF Reject: Attenuates signals above 80kHz LF Reject: Attenuates signals below 150kHz Noise Reject: Reduces trigger sensitivity | ||
Trigger Level Range | CH1,CH2: ±8 divisions from center of screen EXT: ±1.2V EXT/5: ±6V | ||
Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ≥20ns) | CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen) EXT: ±(6% of setting + 40mV) EXT/5: ±(6% of setting + 200mV) | ||
Holdoff Range | 100ns-10s | ||
Trigger Type | |||
Edge | Trigger on the rising or falling edge | ||
Pulse Width | Trigger (when >,<,=,≠) on positive or negative pulses Pulse Width Range: 20ns-10s | ||
Video | Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM) | ||
Slope | Trigger (when >,<,=,≠) on a positive or negative slope Set Time: 20ns–10s | ||
Overtime | from the rising or falling edge Set Time: 20-10s | ||
Alternate | Internal trigger on edge, pulse width, video or slope | ||
Measurement | |||
Cursors | Manual: The difference between voltage cursors △V; the difference between time cursors △T; 1/△T calculated by Hz. Tracing: The voltage and time at a waveform point | ||
Automatic | Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width | ||
Display | |||
Type | Right angle 7"TFT 16-digit color LCD | ||
Resolution | 800*480 dots | ||
Contrast | 16 gears, with the progress bar to show adjustment | ||
Interface | USB host and USB slave | ||
Power Supply | |||
Voltage | 100-120VACRMS(±10%)，45Hz to 440Hz，CATⅡ 120-240VACRMS(±10%)，45Hz to 66Hz，CATⅡ | ||
Power | <30W | ||
Fuse | 2A, T rating, 250V | ||
Mechanical | |||
Size | Length: 313mm Width: 108mm Height: 142mm | ||
Weight | 2.08KG (exclusive of packing and accessories) | ||
Note: we'll ship this item via express mail service to USA, Canada, Australia, New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxemburg, Malta, Norway, Sweden, Swiss, Spain, Italy, UK, Japan, Korea,Thailand, Malaysia, Indonesia, Philippine, Singapore.
Clients from other countries pls contact with us in advance to confirm the different shipping charges before you bid.