One-off Disposable USB Temperature Data Logger

 

Introduction:

Small, light, waterproof and in a food safe wrapper, the single used data logger is ideal for monitoring the temperature of shipments in transit. Recordings are started by pressing the start button. The data logger is then placed inside the carton and dispatched. At the receiving end, the data logger is taken from the package and removed from the protective wrapper. It is placed into the USB slot on a computer to download data and export report via easy software can be downloaded on a website anywhere.

 

Features：

1. Temperature records for the cold chain logistics

2. No need to setup for the data logger

3. One button to start and stop logging

4. Very easy to install the PC software downloaded via internet website anywhere

5. Very easy software interface, not any menu operations

 

Specifications：

Use Type: Single Use

Temperature Measurement Range: -30C to +80C

Temperature Measurement Accuracy: ±0.5C

Resolution: 0.1C

Shelf Life / Battery: 1 Year/3.0v Lithium Battery

Data Capacity: 32000 readings (MAX)

Recording Interval: 12secs, 36secs, 1mins, 2mins, 3mins, 5mins, 6mins, 12mins Selectable

(10secs-12hours selectable)

Recording Period: 7days, 15 days, 30 days, 60 days, 90 days, 120days, 180 days Selectable

Startup Mode: Manual To Start (Push the button)

Alarm Type: Single Type / Accumulation Type

Protection Class: IP67

Conforms to: CE, ROSH, GSP, EN12830

Supporting Software: DGraph Easy

Report Generation Mode: PC Software Report

Communication Interface: USB 2.0

 

Button:

Start and Stop: Press and hold the button until the green LED lights to start/stop logging. If green LED do not light for about 5sec. after started, please do not use this data logger. This is a single use data logger, so must make sure it’s correct to start/stop

 

LED:

When logging, green LED will flash once every 10sec. Red LED will flash once every 10sec. when exceeds the limits.

 

Download:

Install the software and driver from the website on the label. Insert the data logger into PC’s USB port. Download readings using the software.