Brand new 250cc 4 Stroke Zongshen CG250 Vertical Engine
Electric start-- 4+1 REVERSE GEAR
Engine Specification:
| Model | ZS167FMM (CG250) push rod |
| Manufacturer | Chongqing Zongshen |
| Type | Single-cylinder, vertical, four-stroke, air-cooled |
| Maximum power and corresponding speed kW / (r / min) | 11.5 / 6500 |
| Rated power and corresponding speed kW / (r / min) | 11.0 / 6500 |
| Maximum torque and corresponding speed N ? m / (r / min) | 17.5 / 5500 |
| Minimum Idling speed r / min | 1400 ± 100 |
| Cylinder diameter mm | 67 |
| Piston stroke mm | 65 |
| Total displacement ml | 229.2 |
| Compression ratio | 9.2:1 |
| Ignition timing | Before TDC 15 ° (1400r/min) |
| Inlet | The following set camshaft |
| Ignition | C.D.I electronic ignition |
| Lubrication | Pressure, splash compound |
| valve clearance mm | 0.05-0.07 |
| Clutch type | Manual wet multi-plate |
| Change file mode | Constant mesh five-speed two-stage variable speed drive |
| Reduction ratio | "Primary: 3.333; a file: 2.909,Second gear: 1.867; third gear: 1.389,Fourth gear: 1.150; five files: 0.9545 " |
| Starting method | Electric start |
| Spark Plug Type | Japanese Model D8EA (NGK) or D8TC (LG) |
| Sprocket size |
16T 428 |
| Oil grade | SF15W / 40 |
| ML total capacity of oil | 1100 |
| Dimensions mm | 358 × 324 × 458 |
Important Notes:
Shipping Surcharge may apply to some regional areas, please kindly contact us for confirmation. Otherwise, shipping invoice will be sent after purchased.
Please check dimension from listing photos before buy,Thanks
ZONGSHEN is also known as ZONSEN in various divisions. The engine you will receive may bear the marking or logo of either ZONGSHEN or ZONSEN, or it may not have any logo at all.
#