JDS2012A

Oscilloscope specifications:

Maximum sampling rate: 200MSa / S
Channels: 1
Bandwidth: 20MHz (can be measured 33MHz)
Vertical Resolution: 8 bits
Input range: 10mv-5v; 100mv-50v (probe X10) (1,2,5 steps)
Vertical Accuracy: + / -3%
Impedance: 1MΩ 25pF
Coupling: DC, AC
Display mode: Y-T
Input voltage: 40v (probe X10); 400v (probe X10) 220v voltage can be measured; (probe X100) 2000v voltage can be measured
Time base                                                           
Time Base Range: 10ns-50ms (1,2,5,5 step) 100ms-5s (Scan scan)
Memory Depth: 2K
Trigger                                                               
Modes: Auto, Normal and Single
Type: rising edge, falling edge
Automatic detection: Support (50Hz-40MHz)
Level:
Digital                                                   
Measurement: peak to peak and frequency
Cursor: Cursor support time and voltage
Equipment                                                  
Screen: 3.2-inch, 16-bit true color, TFT, 320 * 240
Battery: 2000 + mA lithium battery (single cell about 7 hours of continuous work)
Size: 202 * 100 * 35 (mm)

Multimeter Specifications:

Full-scale reading: 4000 counts
DC voltage: 400mv/4.000v/40.00v/400.0v/1000v 5 files
AC voltage: 400mv/4.000v/40.00v/400.0v/750v 5 files
Resistance measurement:400.0Ω/4.000KΩ/40.00kΩ/400.0kΩ/4.000mΩ/40.00mΩ 6 files
Capacitance measurement: 51.20nF/512.0nF/5.120UuF/51.20uF/100uF (30Sec) 5 files
Off detection: less than 60Ω when the buzzer alarm
Diode measurements: 0v-1.5v

Note: we'll ship this item via Epacket to US, Canada and Australia, 

usually the delivery time is about 3 weeks; 

For other countries, we'll ship it via registered air mail of Post, 

usually the delivery time is about 40 days. 

If you want express mail service, please contact us for extra postage in advance.