Get your board up and off the top of the Front Runner Slimline II Rack and free up valuable storage space for a Roof Top Tent or other gear. Designed to keep your boards safe and secure during transport on the world’s toughest roads. Features variable length adjustment, padded board protection and 2 carrying positions.
These two movable holders securely clamp your surfboard in-place vertically on either side of a Front Runner Slimline II Rack for easy transportation to free up room for other gear like Roof Top Tents, Kayaks, bikes, water and fuel, etc.
Adjust the holders along the length of the rack to accommodate various size boards.
2 supplied Front Runner Stratchits hold the Surfboard snug against padded side rests. The Stratchit straps clever cinching system provide easy-on and easy-off secure transport every time.
The vertical holders can be folded down and stored flat against the rack top.
If space on the rack top is available, the holders can be used in their flat “horizontal” positions to mount a surfboard or other larger boards for SUP or wind surfing.
Each vertical holder and side rest has soft touch foam padding to cradle your valuable gear without harming or scratching the surfaces. The Soft touch pads are made from a weather resistant cross-linked, closed cell Polyethylene.
Included rubber pads provide further protection between your board and the Front Runner Stratchit straps.
The brackets are made from 3CR12 stainless steel and sealed with the same durable, weather resistant black powder coating as the Front Runner Slimline II Roof Racks.
In the vertical position the holders measure 400mm (15.8") high from the underside of the Slimline II Rack Tray. When folded flat in the locked horizontal position the holders measure 45mm high from the underside of the Slimline II Rack Tray.
Can be used with Front Runner Slimline II Roof Racks, Bed Racks and Trailer Racks.
Easily bolts to your Slimline II Rack with supplied hardware.
Includes all necessary installation hardware and fitting instructions.
Consists of:
2 x Board Mounting Brackets
2 x Slimline II Rack Latch Brackets
1 x Pair of Stratchits
1 x Pair of Tie Down Rings
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated 3CR12 Stainless Steel
304 Stainless Steel
Foam Pad
Rubber
Product Dimensions:
Outer Dimensions (Single Holder):
559mm (22") L x 85.5mm (3.4") W x 98.5mm (3.9") H
Open Dimensions (Single Holder):
161mm (6.3") L x 85.5mm (3.4") W x 445mm (17.5") H
Weight:
3.4kg (7.5lbs)
About Outback Equipment
Started by a few mates with a shared passion for 4WDs and all things outdoors – Outback Equipment was built on the ideal of bringing old world service back to online shopping.
No flashy sales tactics, no gimmicky products – just good old-fashioned customer service and honest advice.
We only carry a range of products that we would personally use ourselves, products tried and tested for Australian conditions.
We cater to the broadest range of individuals, from the rookie 4WD and camper just getting started, to the saltiest of you outback veterans.
We are 100% Australian owned and operated with our warehouse located in Brisbane.
Due to recent eBay policy changes we can no longer take calls directly to us. You can however still contact us via eBay messages.
Outback Equipment is committed to customer satisfaction. If you are unhappy with any product you receive, simply contact us so we can work with you to resolve the issue as quickly as possible.
Broken or faulty products
If a product is found to be defective, please contact our customer service team as soon as you are made aware of the problem. A repair, replacement, or refund will be organised after consulting with the manufacturer or supplier.
Note: The standard warranty across most products is 12 months unless otherwise specified by the manufacturer.
Change-of-mind or incorrect choice
Customers have up to 30 days to request an exchange or store credit. Items must be returned in original, undamaged condition.
Note: Online store credits are only applicable for purchases made through our webstore.
Return shipping
If a product is deemed faulty and returned within 60 days of purchase, Outback Equipment will provide a Postage Paid label. Claims outside this period are considered warranty claims and postage is the customer's responsibility.
Return address:
Outback Equipment, 1 Murdoch Cct, Acacia Ridge QLD 4110
Please contact Outback Equipment before returning any items.
Fitment or Assembly of Goods
For goods requiring fitment or assembly, our return policy cannot extend beyond the value of the item. Parts must only be fitted by a qualified person. Goods should be inspected for damage prior to installation — no warranty claims will be accepted once fitted.
If you cannot find the answer below, please contact us via eBay between 8.00am–4.30pm Monday to Friday.
My order arrived damaged – what should I do?
Contact us by messaging our eBay store to arrange a return.
I have received the wrong product – what should I do?
Send us a message as soon as possible detailing the error and our team will resolve the issue.
My order never arrived – what should I do?
Contact us through eBay as soon as possible.
I wish to return an item – how do I do this?
Please refer to our Returns tab above for full details.
