Inhalt Angebot:
1 x 7x16mm 12V Glockenankermotor
1 x Messing Adapter. Aussendiameter 1,5 mm, Innendiameter 1 mm, Länge 7 mm
1 x Messing Schwungrad. Aussendiameter 7 mm, Innendiameter 1 mm, Länge 6 mm
Ein sehr leistungsstarker Glockenankermotor von nur 7 x 16 mm Durchmesser und einer 1 mm Welle auf beiden Seiten. Es läuft unglaublich glatt und langsam bei niedriger Spannung und die Qualität für diesen Preis hat viele Kunden überrascht. Das macht Sinn, im Innern ist es ein ähnlicher Motor wie die kernlosen Motoren von Faulhaber und Maxon, jedoch zu einem viel attraktiveren Preis.
Die Adapter ist für zB. eine Schnecke mit eine Innendiameter von 1,5 mm.
Der gleiche Motor ohne Schwungrad, aber mit zwei Adapters können Sie auch in meinem Shop finden.
Der Motor kann Tage laufen, ohne einen Takt zu verpassen. Ideal als Ersatzmotor im Modell für N, H0e, Z oder andere kleine Maßstäbe, die von einem kleinen, aber hochwertigen Motor profitieren.
Funktioniert direkt mit 12V, ein Widerstand ist nicht erforderlich. Mit extra dünnen (0,5 mm), flexiblen Drähten .
Kompatibel mit DCC. Einstellungen für Zimo und Lenz Decoders finden Sie unter http://tramfabriek.nl/digital.html
Breite: 7 mm
Länge: 16 mm
Achsendurchmesser: 1 mm
Achslänge: 5,3 mm (keine Drahtseite) und 5 mm (Drahtseite)
Drahtdurchmesser: 0,55 mm
Min. Drehzahl: 400
Nenndrehzahl bei 12 V: 11.000
Leerlaufstrom: 10 mA
Nennstrom: 40 mA
Standstrom: 0,1A
Lastmoment: 2,5 g.cm
Drehmoment der Anlage (stall torque): 6 g.cm
3 Jahre Garantie auf Herstellungsfehler.
Ein Produkt der Tramfabriek. Wenn Sie mehr als eine Bestellung aufgeben, werden sie zusammen in einer Zip-Tasche mit einer Produkt-Schutzkarte verpackt, um die Umwelt zu schützen.
Wenn Sie in meinem Shop verschiedene Produkte bestellen, bekommen Sie das doppelt bezahlte Porto zurück.
Wenn Sie Fragen haben, zögern Sie nicht zu fragen!
A very powerful coreless motor, measuring only 7x16 mm, with an 1 mm axle that sticks out on both sides. It is running incredibly smooth and slow at a low voltage and the quality for this price has surprised many customers. That makes sense, internally it is a similar motor as the coreless motors made by the likes of Faulhaber and Maxon, only for a much more attractive price.
The Adapter is to use for a worm with 1.5 mm inner diameter.
You can find the same motor without flywheel, but with or without two adapters in my shop.
The motor can run days without missing a beat. Ideal as replacement motor in model for gauges N, OO9, H0e, Z or any other small scale that benefits from a small, but high quality motor.
Works straight on 12V, a resistor is not necessary. With extra thin (0.5mm), flexible wires.
Compatible with DCC. Settings for Zimo or Lenz decoders you'll find on http://tramfabriek.nl/digital.html
Width: 7 mm
Length: 16 mm
Axle diameter: 1 mm
Axle length: 5.3 mm (non-wire side) and 5 mm (wire side)
Wire diameter: 0.55 mm
Min RPM: 400
Rated RPM at 12V: 11,000
No load current: 10 mA
Rated current: 40 mA
Stall current: 0.1A
Load torque: 2.5 g.cm
Stall torque: 6 g.cm
3 years warranty on manufacturing defects.
A product by the Tramfabriek. When you order more than one, they will be packed together in one zip bag with one product backing card, in order to save the environment.
When ordering different products from my shop, the double paid postage will be returned to you.
If you have any question, don't hesitate to ask!