1/2” Pneumatic Impact Wrench
Master Power has been producing quality air tools for a complete range of industrial applications. Today, as part of Cooper Tools, that tradition of quality continues. Innovative design, computer-controlled facilities, special alloys for critical parts, hand assembly, meticulous quality control – all contribute to the Master Power reputation for superbly crafted, durable air tools.
The MP2292 model is an Impact Wrench. The operator actuates and releases the trigger, which starts and stops the air motor. For best performance, a maximum working air pressure of 90 pounds per square inch, measured at the tool while running, is recommended.
· 100% ball bearing motor design.
· Equipped with 1/2” square pin detent sockets retainer.
· Steel clutch housing for long life under severe conditions.
· Protected, convenient reverse mechanism.
· Adjustable throttle.
· Twin hammer anvil for reduced vibrations.
· High Power to weight ratio.
· Built in power regulator with four settings.
· Full power forward and reverse.
· Smooth and efficient impact mechanism.
· Compact clutch design.
· Reversible.
Specifications (at 6.2 bar/90 PSI)
Model Number – MP2292
Drive Size (square) – 1/2”
Drive Type – Square
Configuration – Pistol
Retainer Type – Pin
Actuation – Trigger
Reversible – Yes
Ratcheting – No
Working Torque in Forward – 30-300 ft-lb (40-407 Nm)
Working Torque in Reverse – 30-300 ft-lb (40-407 Nm)
Free Speed – 7,000 RPM
Impacts Per Minute – 1,200
Air Inlet (NPT) – 1/4 in
Minimum Hose Size – 3/8 in (10mm)
Air Consumption at Load – 40 CFM (1,133 L/min)
This impact wrench has been used in a shop environment. It does show typical signs of wear and tear for impact tools of this type, but it has been tested and does seem to function properly. It is being sold AS-IS.