Tick Performance 7.400" 5/16" Diameter Pushrods (SET 16) - LS1/LS2/LS3/LS6
Listing is for 7.400" Chromoly One Piece
Pushrods, 5/16" diameter, and .080" wall (set of 16).
These one-piece, centerless-ground chrome
molybdenum (also known as chromoly) pushrods are designed for use in hot rods,
oval track race cars, drag race cars and marine applications - so you KNOW
they're up to the task in your LS1, LS2, LS3, or LS6!
LS1/LS2/LS6/L92/LS3/L99/1999-2013 GM Truck
(Silverado/Sierra) 4.8L, 5.3L, 6.0L, 6.2L Engines
- Length: 7.400"
- Diameter: 5/16"
- Wall Thickness: .080"
Manufactured with 5/16" ball ends that are
machined to a tolerance of .001in and laser-etched with the "Tick
Performance" logo, these pushrods not only perform great, but they look
great as well. Made of SAE 4130 seamless tubing. Case hardened to RC60.
Don't see the size you need? These are available in anything from 7.000" through 11.550" long in 0.025" increments. Contact us for details!
7.400" is the standard LS length, but any
of the following can affect pushrod length required and each application may be
different.
- Cylinder Head Deck Thickness
- Block Deck Height
- Valve Stem Length
- Rocker Arm Brand
- Cam Shaft Base Circle Diameter
- Lifter Design, Etc.
We highly recommend that you measure you
particular application to determine correct pushrod length due to the number of
variables involved.
We cannot recommend a length based strictly on
combination and the only way to determine required length is to measure
appropriately.
