Brand new SBS PERFORMANCE Parts' undermount Front racing splitter for the 2015-2020 Mustang Shelby GT350Rs. This splitter is made from 1/4" Black ABS automotive plastic.
DOES NOT REQUIRE THE REMOVAL OF THE FRONT BUMPER. HOLES ARE PREDRILLED!
More sturdy than Carbon Fiber splitter.
Bolts directly to the front bumper and sub-frame through the stock belly pan holes and through the factory stock belly pan. No need to remove the front bumper to install this splitter. 15-30 minute install time. Need a jack, 2 jack stands, 7mm socket/ratchet, T27 Torx head driver, Phillips screw driver.
Comes with:
1- 1/4" ABS black splitter 70" x 25".
12- 6M-1 30mm screws
6- #8 x 3/4" screws with 1 1/4" washers
4- #8 x 2 1/2" screws with 1 1/4" washers
2- 6" support rods SHIPPED SEPERATELY
PLEASE NOTE: EACH SPLITTER IS MADE AFTER YOUR PAYMENT WITHIN 3 BUSINESS DAYS
SPLITTER SUPPORT ADJUSTER RODS ARE HIGHLY RECOMMENDED FOR HIGH SPEED DRIVING!!!
This splitter is designed to create down force on the front of your car. The higher the speeds, the more downforce is created. DO NOT USE THIS Splitter without installing at least 2 spoiler support (adjuster) rods! Returns are accepted only if splitter has not been installed, unless there is a fitment issue or the incorrect splitter was purchased-based on year or model.
The grainy side of the automotive ABS is the top/upper side of the splitter. The smoother side of the splitter is the bottom. The grainy side is extremely durable. Theses splitters are almost impossible to break which makes it so ideal for this applications. Please note that bottom smoother side may come with lines from manufacturer and the bottom side is very easily scratched, even a soft microfiber cloth can scratch because it is raw, unfinished ABS plastic. Some buyers have opted to have the bottom side painted and have installed the splitters upside down, allowing the painted side to be on top.