RFID Digital Lock For Spa Swimming Pool Gym Electronic Cabinet Drawer Lock.  Lock works on 125khz frequency.

Ships in 24 Hours or less! USA seller

These are 100% tested and pre-programmed.  RFID card is the management card and the 2 fobs are the user fobs.  You can add more cards yourself.

Fits doors up to 0"-1.2" thick 
Ideal of cabinets, lockers, cupboards, medical carts, data racks, gun boxes, safes. (no metal)
RFID Keyless Designed for Hidden Installation
15,000 openings from 2 x AA batteries
Public or Private Functions
Product Size:Lock 3.38" x 2.48" x 1.1", Latch 2.05" x 1.89" x 0.63"
Key Type: ID Card, RFID key fob

Installing Steps:


RFID Card is the management card and the Fobs are the user cards.  All come pre-programmed.

1.Install the lock

2.Fill the 2 AA batteries(Alkaline or lithium recommended)

3.Install the lock catch

 

Simple, EASY, DIY. It installs at right angle(door and side). it's perfect for wooden door cabinets.

1). Fill 2xAA 1.5V Batteries in the lock, and you can add RFID Cards.(Managing Card:1pc, Guest Cards,10pcs)

Two modes, you can change by yourself.

One use any cards to open the cabinets(this is perfect to use at home)

Another is use the managing card or two guest card to open the cabinets(this is perfect to use at businesses where you want 2 keys to be used to open the lock.

2). Fix the lock at inside of cabinet. Close it.

And use ID card to touch outside of cabinet, the lock will beep and open the door.(Note that FOBs only can be used for Max 1" thick door, the RFID cards can be used for Max 1.5" thick door)

 Operation Instructions
1.Reset
Install 2 x AA 1.5V Batteries, press the reset button at the backside of the lock body until a long beep.
2.Creating Management Card
After reset the lock, swipe the RFID card / tag, this first card / tag will be configured as Management Card.
3.Select Unlock Mode
After setting the Management Card, you should select the unlock mode.
(1)Press the reset button shortly and release, if you hear one short beep and one long beep, this is for Single Mode.
(2)Press the reset button shortly and release, if you hear two short beep and one long beep, this is for Dual Mode.
4.Add User Card
Swipe the management card, and swipe the new cards which you want to add within the beeps.
5.Delete Cards
Same as reset. Press the reset button at the backside of the lock body until a long beep, all management card and user cards will be invalid. Then you can set new management card.

BATTERY

      Low Voltage Alarm: Please use 1.5V AA Batteries (alkaline or Lithium). When you swipe the card to unlock, the alarm will alert (you can hear a long beep) when the battery power is low. You still can swipe card to unlock for max. 50 times. Please replace the batteries promptly.  If batteries completely die, the striker will not engage with the lock.

Package:

1x Lock without batteries

1x lock catch

1x ID Card(work at about 1.5" distance Max.)(Preset as management car)

2x key fobs, 1" max distance. (preset as user cards)

1x Package of Screws


Returns are free on any item that you receive that is defective or an incorrect item was received.  Returning an item for any other reason is still accepted assuming items are in the same new condition.  However, the buyer will be responsible for the return shipping cost.
For any returned products, up to a 25% restocking fee can be added based on the condition of the returned product.

Why Lock Connection?  Simple, we are lock and hardware experts.  We can be contacted via phone or email.  We offer support on all products.  We ship within 24 hours and typically less than 12 hours.  We aren't satisfied unless you are satisfied!  Check us out and see the difference.