Please check the trunk handle size carefully before make the order so that our camera can be fit for your car.
(Below type and years Just for a reference, please check trunk handle size and Leave the note you want LS8011 or LS8012 )
Size:92X35mm
For Trunk Handle VW Skoda Octavia
Octavia 2 Facelift Bj 2009
Octavia Kombi 5e Bj 2013/Roomster/Yeti
Superb Combi Kombi 2010-2014
Specification:
Image sensor: Color 1/3" Sensor CCDSupport NTSC or PAL Video System(If you want the PAL.Please leave the note and add us USD5)
Resolution: 756(H)×720(V) Pixel
Horizontal resolution: 480TVL
Automatic White Balance
Automatic backlight compensation
Minimum illumination 0.2 lux only
RCA video output Vpp/75Ohm
Operating on 12V DC / ca. 200mA
Operating Temperature: -20°C~ 60°C, RH95% Max
Storage temperature: -30°C ~ 60°C, RH95% Max
Video cable length: 6m
Power supply cable length: 1.5m
Features:
· Weatherproof, Can be Used both in car and home.
· CCD imaging sensor.
· Support NTSC OR PAL Video system.
· High-definition and wide viewing angle.
· Applicable to variety of Vehicles: car, truck, RV, mini-van etc.
· Easy to install, you can install the monitor via mount holder or universal bracket.
· 6m Video cable.
· Can help avoid incidents and accidents abrasion well.
Package Content:
· 1x Car Rear View Camera
· 1x6m Video Cable
· 1x1.5m Power Cable
Install tips
Take out your trunk handle at the back of your car.
Connect the built-in trunk handle of the camera to where the stock trunk handle was connected to get the power
Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.
Connect the video cable of the camera to the extension cord.
Connect the extension cord to your car monitor.
You will see the images when your car is in reverse shift.
