150cm RGB Remote LED Strip Rear Trunk Tailgate Brake Turn Signal Light Flow Type
Features:
*100% Brand New
*100% Waterproof
*Item type: Daytime Running Lights Lights/Rear Lights/Luggage Compartment Light/Tail Lights,etc
*Voltage: DC12V
*Light Source: LEDs strips
*Color: RGB
*Length: 150cm (59")
*This strip is universal, it can be used for all cars.
*150CM(59") used for medium models, senior models, luxury models, sedan models
*100% Waterproof
*Item type: Daytime Running Lights Lights/Rear Lights/Luggage Compartment Light/Tail Lights,etc
*Voltage: DC12V
*Light Source: LEDs strips
*Color: RGB
*Length: 150cm (59")
*This strip is universal, it can be used for all cars.
*150CM(59") used for medium models, senior models, luxury models, sedan models
Instructions:
*36 Driving Modes
*4 Fow Modes
*3 Brake Modes
*5 Speed of Steering
*Led strip with adjustable length
*Steering Speed Synchronization
*Easy to operate
*Card Type RF Remote
*No Operation Auto Lock
*Restore Factory Defaults
*Easy Remote Pairing
Function:
*Restore Factory Defaults:Continuous press 5 times to restore factory default.
(Operation has a white light boot effect tips)
*Unlock:Press to unlock.(Unlock the success of a shite light to unlock the effect of tips)
*Pairing:Continuous 5 times to complete the remote control abd controller pairing.(Matching success LED strip with white flashing 4 times.)
*Quickly set the driving effect:
1.Ice blue 2.Pink 3.Purple
*Press to change Flow Modes:
Left,Right,to both ends(default),to the middle.
*Increase or reduce the speed of driving mode.
*Restore the default speed of driving mode.
*Selete the brake effect: Keep red(default),Red flash 3 times after the long bright,Flashing red
*Increase or reduce the speed of steering and double flash modes.
*Selete this mode, the speed consistent with the turn signal.(default)
*Increase or decrease the lenght of the drive LED stirps(Step 5cm, Of between 0.3m up to 2m)
*Set the drive LED strips with a length of 1.5 meters.(default)
Cautions:
1.Re-power-up or restore factory settings are initally locked. Please unlock and then operate.
2.For 10 seconds without any operation, the system automatically locked.(there is a white lock effect prompt)
3.When the pairing is complete, the other remote controls can not operate the paired controller. To cancel the pairing, please restore the factory defaults.
4.When you set up an action, the system will demonstrate the current effect.
