Door Handles Screws, Sleeves, Fixings, Spindles, Grub Screw, Repair Parts

M3 and M4 SCREW CONNECTING BOLT WITH SLEEVES 

8mm Plain Bar Spindle - various sizes

8mm Split Ends Bar Spindle - various sizes

Grub Screws - silver and brass

Choice of Multi pack  and Color of M3 and/or M4 Connecting Screw with Sleeves, Spindles and Grub Screws

General Description for M3 and M4 Door Handles Connecting Screws

• Used to fasten door handles, knobs, roses and escutcheons. These screws with sleeves are used to replace existing or damaged screws that attaches two handles together.

• How to use: Drill a hole through the door leaf, place door handle on the door to match up with the hole drilled and push the screw trough the door handle, door leaf the handle on the other side. Attach the sleeve and tighten up. Follow these instructions for all 4 holes in the door handle. The result is a handle securely fixed with screws that cannot be pulled through.

Item Description/Technical Data for M3	Item Description/Technical Data for M4
Both the sleeve and the screw has a slotted head.	Both the sleeve and the screw has a pozi head.
Color:  Brass or Chrome plated	Color:  Brass or Chrome plated
Dimensions: Screw overall length: 50 mm Screw diameter is 3mm Sleeve overall length: 22.6 mm Sleeve diameter: 4.75 mm	Dimensions: Screw Overall length: 60 mm Screw diameter: 4 mm Sleeve overall length: 20 mm Sleeve diameter: 5 mm
Where longer or shorter screws are required. The screw lengths can be cut to suit doors width of between 35-50 mm thicknesses. Cuts can be done at 35, 40, 45 or 50 mm.	Where longer or shorter screws are required. The screw lengths can be cut to suit doors width of between 35-50 mm thicknesses. Cuts can be done at 35, 40, 45 or 50 mm.

Note: Both M3 and M4 screws are not security screws and therefore are not suitable for external door handles.

General Description for door handle / knob 8mm Bar spindle and/or Split Spindle

• Door handle spindles or bar replacement. Sometimes the spindle between your door handles can wear and tear over time or even twist due to force, this spindle offers a cheaper alternative to replacing the handles.
• High quality spindle/bar that passes through the door and secures the handles on both sides. Available only as split spindle.
• The bar spindle is suitable for lever on rose or back plate handles where the handle is not fixed via grub screw to the spindle but relies on plate or rose for pulling force. Can be used in conjunction with bolt through fixings

Item Description/Technical Data for door handle plain bar spindle	Item Description/Technical Data for door handle split ends bar spindle
Color:  Zinc plated	Color:  Zinc plated
Dimensions: Length:90mm, 100mm, 110mm, 120mm, 130mm, 140mm Thickness: 8mm	Length:100mm, 110mm, 120mm, 130mm, 140mm Thickness: 8mm

 

 

General Description for door handle / knob 8mm spindle

•  Used to fasten door handles,lever handles and knobs on the spindle

• Also widely used in various industries and machinery to make communications and electronic products, locks, lamps, lighting, joinery and many more.

• Very strong and durable.

Colour : Brass OR Silver

Dimensions:  Screw Overall Length: 6mm

                       Screw Diameter: 6mm
Made in E.U.

 

Feedback: Since feedback is so important on eBay and helps us all identify the good guys from the not so good guys, we would appreciate if you kindly leave us positive feedback with a 5 star rating.

We are extremely customer focused, therefore if you have any problems please do not hesitate to contact us and give us a chance to rectify the problem. We will always go out our way to keep our customers happy and help them along the way in the unlikely event a problem occur.