On1shelf products
Jubilee® Adjustable Worm-Drive Hose Clips
Select the size and specification for your project
Product details
Adjustable worm-drive hose clips for fastening a compatible hose over its connector. The screw engages the band to draw the clamp around the assembled joint. Choose the required material, clamping diameter range and pack quantity from the listing options.
- Screw adjustment within the selected diameter range
- Material and size choices for different installations
- Choose a single clip or the listed multi-pack
Product specifications
| Product type | Adjustable Worm-Drive Hose Clips |
|---|---|
| Brand | Jubilee |
| Adjustment | Worm-drive screw |
| Size measurement | Clamping diameter range |
Measure the assembled hose
Measure the outside diameter where the hose sits over the fitting. The size range describes the clamp diameter, not the internal bore of the hose. Select a range that contains the measured joint diameter and leaves practical adjustment for fitting.
Material selection
The listing offers the materials shown in the selector. Match the choice to the moisture, exposure and equipment requirements of the installation. A zinc-protected mild-steel option and a stainless-steel option are different products; the selected option determines which is supplied.
Typical applications
Useful for suitable hose-to-fitting connections in general workshop, plumbing, irrigation and equipment maintenance. Check the required clamp design for the hose and fitting. The pack contains one selected size and material, rather than a mixed-size assortment.
Choose your option
| Choose Material | Mild Steel, Stainless Steel |
|---|---|
| Choose Size | 9.5-12mm, 11-16mm, 13-20mm, 16-22mm, 18-25mm, 22-30mm, 25-35mm, 30-40mm, 32-45mm, 35-50mm, 40-55mm, 45-60mm, 55-70mm, 60-80mm, 70-90mm, 85-100mm, 90-120mm, 110-140mm, 120-150mm, 135-165mm, 158-190mm, 184-216mm, 210-242mm, 235-267mm, 260-292mm, 286-318mm |
| Choose Quantity | 1 Clip, 2 clips, 4 Clips, 10 Clips |
Available combinations vary. Use the eBay selectors to choose the complete specification and check current availability. The order contains only the selected option.
How to use
Place the clamp over the section of hose supported by the fitting, align the band squarely and tighten with a suitable driver. Follow the hose and equipment manufacturer’s fitting instructions and inspect the completed connection.