RTV Skin Safe Thixo Body Silicone Mould Making Rubber 500g kit

Description

Kit consists of 250g of PART A and 250g of PART B 

Total kit volume 462ml

---

This product is odourless, non-toxic and formulated specifically for applying to the human body for life casting.

PART A is a red liquid and  PART B is a blue liquid which act as a visual aid, turning purple during the mixing process. The two components mix easily with a simple 1:1 ratio with a working time of 5-8 minutes with a cure time of 20-30 minutes @ 25°C.

Once cured the rubber is a flexible, elastic, material with outstanding release properties, a high chemical resistance and a temperature resistance of 200°C. There is practically no shrinkage (0.1%) and excellent reproduction of fine detail.

One Hand and Wrist
500g of Thixo Body Moulding Rubber
3 x (15cm x 2.7m) Modroc Bandages

One Arm with Shoulder
2kg of Thixo Body Moulding Rubber
8 x (15cm x 2.7m) Modroc Bandages

Face
500g of Thixo Body Moulding Rubber
3 x (15cm x 2.7m) Modroc Bandages

Face and Partial Neck
1kg of Thixo Body Moulding Rubber
4 x (15cm x 2.7m) Modroc Bandages

Front Half of Head
1kg of Thixo Body Moulding Rubber
5 x (15cm x 2.7m) Modroc Bandages

Full Head and Neck
2kg of Thixo Body Moulding Rubber
10 x (15cm x 2.7m) Modroc Bandages

Chest
2kg of Thixo Body Moulding Rubber
8 x (15cm x 2.7m) Modroc Bandages

Full Torso Front and Back
7kg of Thixo Body Moulding Rubber
34 x (15cm x 2.7m) Modroc Bandages

One Foot
1kg of Thixo Body Moulding Rubber
4 x (15cm x 2.7m) Modroc Bandages

One Lower Leg
2kg of Thixo Body Moulding Rubber
10 x (15cm x 2.7m) Modroc Bandages

One Full Leg
5kg of Thixo Body Moulding Rubber
18 x (15cm x 2.7m) Modroc Bandages

Properties	Units	Thixo Body
Pot Life (25°C)	Minutes	5-8
Cure Time (25°C)	Minutes	20-30
Viscosity (25°C)	Mpa.s	5500
Density (25°C)	g/cm3	1.08
Hardness	Shore A	20
Linear Shrinkage	%	0.1
Tear Strength	KN/m	26
Elongation at Break	%	500
Tensile Strength	Mpa	6

SUITABLE FOR USE WITH:

• Polyurethane resin 

• Epoxy resin
• Polyester resin
• Acrylic resin
• Plastisol (PVC)
• Plaster
• Cement
• Polymer Clays
• Waxes
• Soaps
• Metals with a pouring temperature below 200°C

*CURE INHIBITION*

A release agent will not create a sufficient barrier to prevent cure inhibition but a layer of paint will. If the paint is solvent based allow sufficient time for the solvent to completely evaporate off as that too can inhibit the cure.

Great care must be taken when handling and mixing all addition-cured silicone elastomer systems. All the mixing tools (vessels and spatulas) should be clean and constructed in materials which do not interfere with the curing mechanism. The cure of the rubber can be inhibited by the presence of compounds of nitrogen, sulphur, phosphorus and arsenic; organotin catalysts and PVC stabilisers; epoxy resin catalysts and even contact with materials containing these substances e.g. moulding clays, sulphur vulcanised rubbers, condensation cure silicone rubbers, some printed plastics, onion and garlic.

Shipping

We combine postage however ebay wont calculate the correct amount automatically. You will need to click the request a total from seller option whilst checking out so I can set it to the correct amount before you complete the payment. I do issue refunds on multiple orders if a total isn't requested. However ebay don't refund their fee on partial refunds so I have to deduct their fee (11%) from the saving.

We aim to process, pack and dispatch your orders in the shortest time possible, most orders will be dispatched within 1 business day. Orders placed on Saturday, Sunday or holiday periods will be processed on the next working day. Where an estimated timescale for delivery is provided, this is an estimate only and your items may be delayed in being received due to circumstances beyond our control (such as a courier delay, or at busy times). DWR plastics ltd shall not be under any liability to the Purchaser in respect of delay in delivery howsoever rising.