The V-Pro series comprises programmable intelligent dimmers with a choice of dimming modes for wider compatibility. All V-Pro dimmers offer superior dimming technology to deliver the best possible dimming performance for a given load.

Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube (see below link).

This dimmer is designed to control LED lighting loads requiring trailing-edge or leading-edge control. We also have a range of touch and remote control dimmers.

V-Pro series dimmers are designed for use with LEDs and work with the majority of dimmable LEDs on the market. They are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot.

Please adhere to maximum rating listed on the Varilight datasheets on their website or click the link below for the V-Pro instruction leaflet.

These Dimmers can be used in 2-way circuits (where one lighting circuit is controlled from two locations). In order to achieve 2-way switching, they must be paired with a standard 2-way switch in the other location. 3-way switching can also be achieved by adding an intermediate switch into the circuit. Please note, if total dimming is preferred from all switched locations, in a 2 or 3-way circuit then choose the Varilight Touch and Remote Series range of dimmers, or the Eclique range (if dimming LEDs) in conjunction with Slave Dimmers. The V-Pro Dimmers have a soft start feature and intelligent overload protection.

These dimmers do not work with lighting panels (LED or CFL).

Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead.

-0W-120W (max. 10 LEDs)

-Fits in a 25mm Deep Wall Box

- V-Pro dimmers are not suitable for wire-wound "toroidal" transformers.

-Trailing and Leading-Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes. With the V-Pro series you are able to adjust the minimum brightness setting.

-The Best Dimmer for Most Good Quality Dimmable LEDs.

-To clean product, we recommend only using a microfiber cloth.