This auction is for a single Accufab 105mm "Big
Daddy" fox body mustang polished throttle body part
number F105.
This item includes the throttle body and gasket.
Mounting hardware is not available. The ORIGINAL version of this throttle body now comes with a hard anodized black linkage arm, as pictured.
Accufab has a NEW throttle body for the Ford
1986-1993 Mustang 5.0L. Accufab created the
ultimate, must have throttle body, the Big Daddy!
Yes, this Big Daddy is sure to catch your eye by its
impressive size, 105mm flowing 1504 cfm. This 105mm
throttle body is CNC machined from billet aluminum,
and the exterior is polished to an eye-catching
finish. The shafts are also CNC machined from
stainless for durability and quality, with brass
blades and the highest quality bushings, bearings
and screws. Manufactured in the USA. The 105mm
throttle body features a split shaft design which
helps prevent the shaft from breaking under intense
pressure. The throttle body is 105mm at the blade
and has a 4.5" inlet. There is no vacuum elbow
and 4.5" tubing is required.
*Notice, throttle bodies are boost-ready, fully sealed, and air-leak tested to 100 psi.
Wholesale Distribution
available, contact us and we can create a
special listing for you!
Wholesale Distribution available,
contact us and we can create a special listing
for you!
This Throttle Body
will fit all of the following vehicles:
1986-1993 Ford Mustang GT, lx and
Cobra 5.0L
Accufab The ultimate in Ford Mustang 5.0L
Throttle Bodies.
We offer seven different sizes for your Mustang
5.0L, as well as a Standard, MAX and Race
Versions in most sizes. Checkout our eBay store
for all of the options, and give us a call if
you need help deciding on which throttle body is
best for your application.
Features: Full body stainless steel shaft, 3 position linkage arm with threaded ball stud, linkage arm is hard anodized black, with Idle Air Control provision, O-ring Groove seal on the back, and Sealed and Air Leak resistant up to 100 psi. All 105mm throttle body versions measure 105mm at the blade and each has a 4.5" inlet. There is no vacuum elbow and 4.5" tubing/hose is required.
Better Air Flow for More Power: This 105mm upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications.
Exceptional Quality. This throttle body is CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Furthermore, the 105mm throttle body features a split shaft design which helps prevent the shaft from breaking under intense pressure. Manufactured in the USA.
Application. This Accufab 105mm single blade throttle body is specifically designed for use on the 1986 - 1993 Ford Mustang 5.0L.
Technical Notes. Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.
Accessories Included: The throttle body O-RING and ball stud, plus an IAC gasket are included. No mounting hardware available.
Accufab has several optional accessories to help adapt an Accufab 5.0L Ford style throttle body to be used with GM electronics instead of Ford electronics. For example, we offer a TPS adapter to use your GM TPS (Throttle Position Sensor) or an IAC (Idle Air Control) adapter to use your GM IAC. If you need to relocate the IAC or block it off all together, we have developed parts to help accomplish these goals.
We have throttle bodies to fit almost every
performance application!
Check out our eBay
Store or contact us
|
