10m HIGH PRESSURE SWIVEL HOSE for KARCHER COMMERCIAL STEAM CLEANERS & PRESSURE WASHERS
...from a Trusted Specialist KARCHER Sales, Service & Spares Dealer since 1987 - your assurance of Quality, Experience & Expertise
Premium Quality Hose with a Triple Washer, 11mm Stainless Steel Swivel Fitting for ORIGINAL KARCHER TRIGGER GUNS ONLY as fitted to models HD 5/11C, 5/12C, 6/12C, 6/13C etc. - BUT CHECK YOUR HOSE FITTING FIRST!
- A Quality Replacement for Burst, Damaged, Kinked or Braiding-Exposed Hoses.
- Don't take chances ignoring obvious damage and excessive wear - fit a new hose promptly.
- Remember that hoses are subject to very high pressures, heat, abrasion and being driven over.
- Avoid accidents from scalding, high pressure puncturing and chemical exposure by replacing in good time.
***PLEASE READ DESCRIPTION BELOW TO ENSURE CORRECT FITTING BEFORE PURCHASING***
SPECIFICATION AS FOLLOWS:
- 5/16" bore, steel reinforced rubber hose
- 11mm O/D Spigot with 3 STEEL lock washers (as in photo)
- Stainless Steel Spigot - beware of cheap corrosion-damaging mild steel copies
- M22F Extended female threaded coupling at machine end
- 10m (33 feet) full length - NOT cheaper shorter 30 feet (9m)
- 150 degrees centigrade working temperature (steam rated)
- 210 Bar pressure rated (3,000psi, single wire braided)
- Heavy Duty O-Rings fitted within coupling at each end of hose
- Integral Swivel Collar - locates into base of trigger gun to support hose.
- German Original Quality Hose - not Chinese, Italian or Middle East
- Premium specification alternative to cheaper aftermarket hoses
- Legally stamped with pressure rating and date of manufacture
- ISO 9002 Manufactured - your assurance of the highest standards
- Quality end couplings for long service life and easy fitting / removal
- Tough flexible end cuffs to protect against excessive side pulling
- For use with either electric (240v), diesel or petrol powered machines
- Fitting Instructions Included
OTHER HOSES AVAILABLE
- KARCHER 1/4" (single washer) swivel gun type available (see other listings)
- Heavy Duty Double-Braided Hoses (400 Bar) for 3-phase (415) machines - (see other listings)
- KARCHER 3/8" (M22F x M22F) for older machines and other makes (see other listings)
- Longer or Shorter hoses, double steel braided (H/D) or with different end fittings also available - look in our shop!
Secure Packing & Rapid Next Day delivery is only £9.99 (order by 1pm) Highlands, Islands & Ireland will cost more, ask first.
Any questions, please contact us via our details below or send us an eBay message.
Our Price includes VAT @ 20%. A VAT invoice will be issued with EVERY sale.
Check out our other KARCHER items - DELIVERED FREE if ordered with this item!
ICE Limited - a Specialist KARCHER & Numatic Sales, Service & Spares Dealer since 1987.