YUNIQUE GREEN-CLEAN-POWER – LiPo Battery 7.4V 1700mAh 2S 5C with JST 2-Pin Connector – RC Transmitter Battery for Radiolink RC4GS V3, RC6GS V3, AT10II, AT9S Pro & T8FB

Rechargeable 7.4V 1700mAh 2S LiPo battery with 5C discharge rate, designed for compatible RC transmitters and radio control systems.

Particularly suitable for several Radiolink transmitters, including RC4GS V3, RC6GS V3, AT10II, AT9S Pro and T8FB, subject to checking the connector, polarity, dimensions and electrical specifications of your transmitter.

Compact and lightweight, this battery provides a practical power solution for RC transmitters requiring a compatible 7.4V 2S LiPo battery with JST 2-pin connection.

MAIN SPECIFICATIONS

• Battery technology: LiPo – Lithium Polymer

• Nominal voltage: 7.4V

• Configuration: 2S

• Capacity: 1700mAh

• Discharge rate: 5C

• Connector: JST 2 Pin

• Dimensions: approx. 90 × 32 × 15 mm

• Weight: approx. 69 g

• Rechargeable: Yes

COMPATIBLE WITH RADIOLINK TRANSMITTERS

Designed for use with compatible Radiolink radio control transmitters, including:

• Radiolink RC4GS V3

• Radiolink RC6GS V3

• Radiolink AT10II

• Radiolink AT9S Pro

• Radiolink T8FB

It may also be suitable for other RC transmitters and electronic devices requiring a compatible 7.4V 2S 1700mAh LiPo battery with JST 2-pin connector.

Always check the specifications of your original battery and transmitter before purchasing.

7.4V 1700mAh 2S LiPo

The battery uses a 2S configuration, consisting of two LiPo cells with a nominal combined voltage of 7.4V.

The 1700mAh capacity provides a good balance between operating time, size and weight for compatible RC transmitters.

5C DISCHARGE RATE

The 5C discharge rating is suitable for applications such as compatible RC transmitters that require a stable power supply rather than the very high discharge rates typically required by RC motors.

COMPACT & LIGHTWEIGHT

Approximate dimensions:

90 × 32 × 15 mm

Approximate weight:

69 g

The compact design makes the battery suitable for compatible transmitter battery compartments where available space is limited.

Always measure the battery compartment before ordering.

JST 2-PIN CONNECTOR

The battery is equipped with a JST 2-pin connector for a simple and secure connection to compatible equipment.

IMPORTANT: JST connectors are available in different sizes, pitches and configurations.

Before purchasing, carefully compare:

• Connector shape

• Connector dimensions

• Pin spacing

• Polarity

• Positive and negative wire positions

Do not rely only on the description “JST 2 Pin” to determine compatibility.

IDEAL AS A REPLACEMENT BATTERY

Suitable as a replacement or spare battery for compatible RC transmitters.

Before ordering, compare the battery with your original and check:

• Voltage: 7.4V

• Configuration: 2S

• Capacity: 1700mAh

• Discharge rate: 5C

• Connector: JST 2 Pin

• Dimensions: approx. 90 × 32 × 15 mm

• Polarity

• Wire positions

• Available battery compartment space

PACKAGE CONTENTS

• 1 × LiPo Battery 7.4V 1700mAh 2S 5C

• JST 2-Pin connector

IMPORTANT – CHECK BEFORE PURCHASE

Before ordering, please check the voltage, connector, polarity and dimensions against your original battery.

Compatibility with a transmitter model does not replace checking the physical and electrical specifications.

Use only a charger specifically designed for 2S LiPo batteries. Never use a charger intended for a different battery chemistry or cell configuration.

Do not use the battery if it is swollen, punctured or visibly damaged. Avoid short circuits, excessive heat and reversed polarity.

YUNIQUE GREEN-CLEAN-POWER – Batteries, cables and accessories for RC models, transmitters and electronics.