This is a linear transformation module, processing by chip, the input of the thermal resistance signal is converted to a temperature output (voltage signal). 

There are two output voltage ranges to choose from.

Module parameters 

1, the working voltage: 9V ~ 24V 

2, the input resistance: Pt100 RTD 

3, the output voltage: 0.00V ~ 5.00V/0.00V ~ 10.00V 

4, temperature range: -100 to +500 (degrees). 

5, output: S2 pads on the circuit board: open (output 0.00V ~ 5.00V); shorted (output 0.00V ~ 10.00V), the default is open. S1 and J1 pads are not used.

6, Applications: Remote data acquisition and control equipment; 

7, Size: (L) 26mm * (W) 23mm * (height) 10mm 

Module interface: 

24V: power supply positive interfaces (9V ~ 24V). 

G: Power to the ground interface. 

IN: Thermal resistance cathode interface. 

G: Thermal resistance cathode interface. 

OUT: Signal output interface (0.00V ~ 5.00V/0.00V ~ 10.00V). 

G: Power to the ground interface. 

Note: When the output 0.00V ~ 10.00V, power supply voltage to 15 volts. 

Output (0.00V ~ 5.00V) Resolution: 0.0083333V / ℃ (V / ° C) 

Output (0.00V ~ 10.00V) Resolution: 0.0166666V / ℃ (V / ° C)

Package include:

1 x New Thermal Resistance to Voltage PT100 to 0-5V 0-10V Linear Conversion Module