Sent via Royal Mail 2nd Class Post. If you require your order urgently please select Tracked 24 or 48 at checkout.
Kerbs for OO gauge roads, 3D printed in matte concrete-grey PLA — in 144 mm strips, jointed every 3 ft.
A model of the standard British 125 mm half-battered concrete kerb with a 150 mm channel
block in front of it, exactly as laid on every street, yard and station approach since
the 1930s. Each strip is
twelve 3 ft kerb units (144 mm — 11 scale metres) with the joints moulded in, so a road
edge goes down in one piece instead of a row of fiddly individual stones. Straight kerbs
butt end to end; the joint between strips is just another kerb joint.
Everything a street needs
- Dropped-kerb crossing: two standard units, a transition unit, six dropped units at
25 mm scale upstand, transition, two standard — a driveway or pedestrian crossing in a
single 144 mm piece
- Radius kerbs: 90° quadrants at 12 mm (footway corners at driveways), 40 mm (a tight
urban junction) and 80 mm (a typical side-road junction), channel on the road side.
Each quadrant turns left or right — just turn it over end for end
- Gully grates: 450 mm square gratings in their frames, to let into the road beside the
kerb where the real ones sit
Made to build to
- Kerb upstand 1.6 mm above the channel; channel 0.4 mm thick, 2 mm wide
- Lay your road surface 0.4–0.5 mm thick up to the channel (0.5 mm plasticard is ideal)
- Build the pavement 2 mm thick up to the top of the kerb (2 mm foamboard or card)
- Flat base — glue straight to the baseboard with PVA or superglue
Moulded in matte concrete grey — nothing to paint
Printed in a matte concrete-grey filament, so the colour goes right through and a cut end
looks like a cut kerb. Use straight from the pack, or a thin dirty wash into the joints
and along the channel picks the detail out.
What's in each pack (choose from the drop-down)
- Street Pack — 26 pieces: 8 straight strips (1.15 m), 2 dropped-kerb crossings,
2 × R80, 2 × R40 and 4 × R12 radius kerbs, 8 gully grates
- Straight Pack — 12 straight strips, 1.73 m of kerb
Sizes
- Straight and dropped strips: 144 mm long, 3.7 mm wide overall, 2 mm tall
- Radius kerbs: quadrants of 12 mm, 40 mm and 80 mm face radius
- Gully grate: 5.9 mm square, 0.6 mm thick
- Kerb joints every 12 mm (3 ft)
Details
- True OO gauge / 4 mm / 1:76 scale; also suits 1:72 and 1:80
- 3D printed in the UK by 3D Peak Print in matte concrete-grey PLA
- Sits perfectly with our concrete Jersey barriers, cable trunking and retaining walls
Scale model for adult collectors — not a toy, contains small parts..