|
Endo Heated Pen R21
Features:
1. efficient
heat to 220°C in 3s.
2. 4
temperature for most of gutta materials
3. 360°
touch to heat up multi-angle operation.
Technical Specification：
Model:
R21
Size:
100x100x195mm
Power
adapter:Input: AC 110~220V 50/60Hz；Output:
DC5V -- 1A
Internal
power supply: DC 3.7V 2800mAh
Type
of protection against electric shock:Class II
Degree
of protection against electric shock:Type c
Operating
conditions：
Operating
temperature: 5℃ ~ +40℃
Operating
humidity: 10%RH ~ 80%RH
Atmospheric
pressure: 50kPa ~ 106kPa
Automatic
shutdown time: 5 minutes
Packing
size: 120x210x68mm
Weight(G.W.):
460g
Packing List:
1×main
unit
2×heating
needle
1×battery
1×charger
base
1×power
adapter
1×English
Instruction manual
Notice:
1.The
heating needle must be cooled to room temperature before cleaning the heating
needle.
2.The
heating needle can be sterilized by high temperature and high pressure, other
parts are
not
allowed.
3.Do
not use non-volatile disinfectants or similar disinfectants to avoid corrosion
of the instrument and serious damage to the product.
&
Endo Motor with Apex Locator
Feature：
1. Built-in
apex locator
2. Visible
colorful OLED screen
3. 360°degree
rotation
4. Built
in different file systems
5. Customized
reciprocating angle adjustable rotation angle in reciprocating mode
6. Switch
to the left hand or right hand
Four working modes:
1. Forward rotation
Intelligent
sensing the surface pressure of a NiTi file,when the torque reaches the setting
limit,the motor will auto reverse.Once the surface pressure is removed,the NiTi
file will rotate continuously in the original direction.
2. Reverse rotation
3. Reciprocating motion
The
reciprocating motion angle is
adjustable,30°,60°,90°,150°,180,°210°,250°,370°for clockwise and
anticlockwise,and combination freely
4. Automatic torque control
Intelligent
sensing the surface pressure of a NiTi file,when the torque reaches the setting
limit,the motor will reciprocate rotation instead of the reveese mode
until the stress is reduced.Once the surface pressure is below the preset
torque value ,the NiTi file will rotate continuously in the original
direction.
Packing:
Main
body *1
Contra-angle*1
Measuring
wire*1
Charge
base*1
Rubber
case*3
Single-head
measuring wire*1
Lip
hook*2
File
clip*2
Touch
probe*2
Charging
wire*1
-
FDA Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller name:Dentistbook
City State: SHENZHEN,China
Telephone number:0755-69985451
|
