Model CF-38:

Package include:

1 x 3D Precision Tool Setting

1 x tip

Due to logistics restrictions, we need to remove the battery from the package, so the battery is not included in our package

Product parameters

Product Name: Trigger 3D Edge Finder

Item model number: CF-38

Repeat positioning accuracy: ≥0.005

Probe direction: ±X ±Y +Z

Probe safety stroke: X.Y plane ±20°, Z direction +2.5mm

Trigger life:≤3 million times

Power supply: CR1632 3V button battery （without button battery in the package）

Measurable insulating materia

1. Installation of the probe

As shown in the figure below, there is a wrench slot at the probe interface. When installing the probe, you must hold the probe seat to prevent it from rotating, otherwise the internal parts of the probe will be damaged.

2. Battery replacement

As shown in the figure below, remove the battery plug, remove the battery with tweezers, replace the battery with a new one, and install the battery according to the "±" mark on the side. After the replacement, plug the battery plug tightly.

Installation of the probe:

There is a wrench slot at the probe interface. When installing the probe, you must hold the probe seat to prevent it from rotating, otherwise the internal parts of the probe will be damaged.

Battery replacement:

Remove the battery rubber plug, remove the battery with tweezers, replace the battery with a new one and install the battery according to the "±" mark on the side. After the replacement, plug the battery rubber plug tightly.

Adjustment of center deflection:

The silver screw is the adjustment screw × 4

Use a dial gauge to measure the runout of the probe ball and adjust the runout to 0.

Model V5:

Package Include:

• 1x V5 3D touch probe
• 1x Stainless steel probe tip
• 1x cable
• 1x Storage box for storing probe

♞【Function】The DIYO three-coordinate probe can realize quick centering, edge finding, center finding, shape measurement and other functions by connecting the CNC to the knife edge, which greatly;Repeatability Accuracy: 0.01 mm/ 0.0004 in. solves the trouble of positioning the workpiece during the second clamping during the machining process.

♞【Supported software】Adapt to various control panels such as grbl control panel and Mach3.

♞【3 wires】NPN-NO 3 wires: Red-VCC (DC5-24V power);Yellow: IO/ Signal Output;Black- GND(DCM); Indicator light: green light when power on, red light after triggering

♞【Material of the probe】The shell is made of fine frosted black oxidized aluminum alloy with a flat surface anti-roll design.

♞【Material of the stylus】The probe tip/stylus is machined from stainless steel up and down, and the ball head is made of tungsten steel ball, which has the advantage of wear resistance.The concentricity is fine-tuned to within 0.05 before delivery. Please measure and adjust it by yourself after receiving the goods. Be sure to use ER11 spring chucks of AAA or above, otherwise the concentricity of the probe tip will be affected.

The feature of waterproof and dustproof greatly extends the service life of the probe.	Our product comes with a storage box. The shockproof cotton in this storage box protects the probe well, and also avoids collisions and scratches during transportation.	The probe tip is machined from stainless steel up and down, and the ball head is made of tungsten steel ball, which has the advantage of wear resistance.The concentricity is fine-tuned to within 0.05 before delivery. Please measure and adjust it by yourself after receiving the goods. Be sure to use ER11 spring chucks of AAA or above, otherwise the concentricity of the probe tip will be affected.

Drawing

Specification:

• Power: DC5-24V
• NPN-NO 3 wires: Red-VCC (DC5-24V power);Yellow: IO/ Signal Output;Black- GND(DCM)
• Repeatability Accuracy: 0.01 mm/ 0.0004 in.
• Feedrate: 50-200 mm/min.
• Approach Direction: ±X, ±Y, +Z.
• Over Travel Protection Distance: X- ± 4mm/0.16 in , Y- ±4mm/ 0.16 in, , Z- 2mm/ 0.08 in.
• Lifetime: > 3 million triggers.

Wirings

NPN-NO 3 wires:

Red-VCC (DC5-24V power);

Yellow: IO/ Signal Output;

Black- GND(DCM);

Indicator light: green light when power on, red light after triggering

Software Recommendation for 3D Probe (We do not provide software)

• If you are using a mach3 system, it is recommended to use the open source Probe Wizard.
• If you are using the grbl system, it is recommended to use Grblgru

Q&A

1.Need to turn on the spindle speed?

• Never, never, never,definitely no.

2.How to distinguish the three wires?

• The red wire is VCC, the black wire is GND, and the white wire is IO.

3.Why is the concentricity different every time the probe is installed?

• Because your ER chuck spring clip cannot ensure 100% uprightness. Every time the probe is installed, even if the concentricity is adjusted to 1 wire, there will still be deviations when the probe is removed and installed again. So your chuck is best to buy AAA and above accuracy (concentricity <=0.005), because many chucks in China have false standards, it is recommended to use a high-precision gauge or tungsten steel rod to check the table after installing the chuck. Look at concentricity. It's best to place the dial indicator at a distance of 50mm from the chuck, which is roughly the distance between the ball head of our probe and the root of the tool handle.

Problem&Feedback
    Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it.
    We are a new member in ebay now, and need understand both of sides
    Pls email us before you want to leave any negative feedback

Refund
    When you have the parcel, and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos
    Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost

Contact us
    Welcome worldwide customer inquire and questions, we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again
    Customer’s satisfaction is very important to us.