【Fast Shipping to EU Customers】
Austria,Belgium,Bulgaria,CzechRepublic,Denmark,Estonia,Finland,France,Germany,Greece,
Hungary,Ireland,Italy,Latvia,Liechtenstein,Lithuania,Luxembourg,Monaco,Netherlands,Poland,
Portugal,Romania,Slovakia,Slovenia,Spain,Sweden,UK.
Package include:
- 1x D50 Ring Rotary Axis (Optional)
- 1x D60 Ring Rotary Axis (Optional)
- 1x D80 Rotary Axis (Optional)
- 1x Round Wheel Rotary Axis (Optional)
Package include:
- 1x D50 Ring Rotary Axis (Optional)
- 1x D60 Ring Rotary Axis (Optional)
- 1x D80 Rotary Axis (Optional)
- 1x Round Wheel Rotary Axis (Optional)
The Optional Rotation Axis
There are four styles of our rotary axis:
The "Conventional Rotary Axis D80" is the 80mm chuck style,which is also the most widely used style chosen by most customers,the application range of clamping is also the widest among the four.
The "Ring Rotation Axis D50&D60" is mainly used for ring jewelry etc.
The "Round wheel Rotation Axis" is mainly used for pen marking.
Pls note:
Hello, our rotary shaft is 4 pin interface, such as bellow.
please confirm if it matches your machine before buying. Thank you.
D80 Rotary Axis
Clamp Diameter: 80mm
Claw quantity: 3
Version: High
Motor: 57*76mm(SNOWIT) With 2 Meter wire
1.Total height High version 250mm
2.Centre height High version: 130mm
3.High version support 180 degree adjust
Application: Fiber laser marking / Laser welding / CO2 laser engraving
Product Display:
D60 Ring Jewelry Rotary Axis
Motor: 60*88
Power supply: 24V
Center height: 50MM (with an elevation angle of 90 degrees)
Chuck: F69. Internal clamp application (product outer diameter 2 to 83mm),External support application (product inner diameter 11 to 91mm).
Application card needles: Factory equipped with four types of card needles with 3 each Transmission mode: direct connection
External dimensions: 130 * 90 * 90mm
Installation hole size: 50 * 50MM (M5.M6 screw)
Chuck maintenance, regularly adding lubricating oil to moving parts to improve service life. Advantages: Strong force, no shaking.
Rotary elastic clamp. Quick loading and unloading, improving efficiency (RE: The 69 chuck is only suitable for light and short products such as rings, bracelets, insulated cup covers, etc For slightly heavier categories, it is recommended to use a standard three grip chuck)
Round Wheel Rotary Axis
(RE: 2 sides can use,front side with 24 channels, back side with M6 screw holes.
Need to use together with stepper motor drive.)
Brand: RATTMMOTOR
Model:D300
Diametre:300mm
Channel: 24pcs (Back side each channel with 4 pcs M6 screw holes)
Gap angle: 15 degree
Channel length: 90mm
Plate thickness: 10mm
Stepper motor: 57mm
Weight: 6KG
Application: Fiber laser marking / Laser welding / CO2 laser engraving
Pls note:
Hello, our rotary shaft is 4 pin interface, such as bellow.
please confirm if it matches your machine before buying. Thank you.
D80 Rotary Axis
Clamp Diameter: 80mm
Claw quantity: 3
Version: High
Motor: 57*76mm(SNOWIT) With 2 Meter wire
1.Total height High version 250mm
2.Centre height High version: 130mm
3.High version support 180 degree adjustApplication: Fiber laser marking / Laser welding / CO2 laser engraving
Product Display:
D60 Ring Jewelry Rotary Axis
Motor: 60*88
Power supply: 24V
Center height: 50MM (with an elevation angle of 90 degrees)
Chuck: F69. Internal clamp application (product outer diameter 2 to 83mm),External support application (product inner diameter 11 to 91mm).
Application card needles: Factory equipped with four types of card needles with 3 each Transmission mode: direct connection
External dimensions: 130 * 90 * 90mm
Installation hole size: 50 * 50MM (M5.M6 screw)
Chuck maintenance, regularly adding lubricating oil to moving parts to improve service life. Advantages: Strong force, no shaking.Rotary elastic clamp. Quick loading and unloading, improving efficiency (RE: The 69 chuck is only suitable for light and short products such as rings, bracelets, insulated cup covers, etc For slightly heavier categories, it is recommended to use a standard three grip chuck)
Round Wheel Rotary Axis
(RE: 2 sides can use,front side with 24 channels, back side with M6 screw holes.
Need to use together with stepper motor drive.)
Brand: RATTMMOTOR
Model:D300
Diametre:300mm
Channel: 24pcs (Back side each channel with 4 pcs M6 screw holes)
Gap angle: 15 degree
Channel length: 90mm
Plate thickness: 10mm
Stepper motor: 57mm
Weight: 6KG
Problem&Feedback
Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it.
We are a new member in ebay now, and need understand both of sides
Pls email us before you want to leave any negative feedback
Refund
When you have the parcel, and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos
Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost
Contact us
Welcome worldwide customer inquire and questions, we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again
Customer’s satisfaction is very important to us.
