This latest Red/Blue Mixed Light-Emitting Diodes, or LEDs, has been around since the early 1920s, but have only recently been used in hydroponics gardening as grow lights. This type of grow light has many advantages over fluorescent and metal vapor lights, and no real downsides other than the initial expense.

While they do cost more in the beginning, LEDs are considerably cheaper in the long run because of their long life span (average life is about 100,000 hours, compared to an average 15,000 hours for other types) and energy efficiency (energy consumption is about 10 to 20% of comparable fluorescents and metal vapor lamps). In addition, LEDs are cooler, thus eliminating the need for fans and elaborate ventilation systems.

INSTRUCTIONS:

• Best for your Plants: Red and Blue Mixed LED bulbs are suitable for plants heightening and thriving.
• Can be used to control florescence in hydro and restrain flowering for higher and stronger.
• More Efficient: 100% of the power input for our LED grow lights is used for your plant chlorophyll production.
• Better for Environment: It saves 50% to 90% in energy consumption compared to incandescent bulbs or fluorescent tubes.
• Less Heat: Low heated LED bulbs will protect your plants well.
• No ballast to burn out likes other plant lights.
• No infrared ray and ultraviolet radiation to destroy your plants.
• The best lighting time (led grow light lighting time plus sunlight lighting time) for plant growing should be 10-14hrs.
• Perfect for indoor growing.
• Minimal heat to keep your plants from burning.
• Brand new in retail package and ready to ship.

SPECIFICATIONS:

LED 225 Panel:

• Thermoplastic Circuitry board material
• 225 LEDs = 165 Red + 60 Blue Mix
• LED Bulb Diameter: 5mm
• Blue light wavelength:460-465 nm
• Red light wavelength: 650-655 nm
• LED Bulbs Power: Power: 13.8W
• Voltage: 240Vac
• Australia 3-pin plug
• Lumen(Red/Blue): Red - 7.2Lux x 165Bulbs + 4.5Lux x 60Bulbs
• Recommended Coverage: 45cm x 45cm
• Recommended Height: 0.3-1.5m
• No ballast needed, simply plug it in and ready to play
• Package size: 30.5cm x 30.5cm x 5cm
• Package weight: 1 kg​​​​​​​

The Hydro Series T5 propagation lights offer you a headache-free solution for keeping your young clones, seedlings and precious mother plants happy and productive while saving electricity and keeping temperatures in your propagation area low. Young seedlings or cuttings will respond much better in low light conditions, allowing them to establish themselves with a good root system before they are ready for transplanting and placing under a more intense light for them to grow fast. Our propagation lights are perfect for seedlings or cuttings as they provide the correct spectrum and amount of light.

All electrical items have fitted with Australian Power Plug and Standard Lighting Socket. 

Designed by industry leading reflector manufacturer Growlite (makers of the OG and Karma) and utilising 95% reflective aluminium, these propagation lights provide even light distribution with specially manufactured reflectors that increase lumen output by up to several hundred percent compared to T5 batten lights with no reflectors or outdated, inefficient T8 shop lights. Because these lights feature cool running high output fluorescent lights, they can placed within centimetres of a plant to maximise light absorption and increase clone and seedling success rate without risking heat burn, as well as keep the temperature in the growing environment to a minimum. In addition to its propagation abilities, this light can also be hung sideways for use as supplemental lighting for more mature plants, making it even more versatile in the grow room.

These high quality fixtures are encased in a tough-as-nails, powder coated, steel housing with side vents to allow for cool operation, and the T5 fixture is backed by a 3 year warranty to give you peace of mind for many grows to come.

Extra value added features include:

Series power outlet that allows multiple lights to be powered from a single electrical outlet through daisy chaining or to power low wattage devices, such as desk fans or air pumps. Multiple on/off switches (for 4, 6 and 8 tube models) that each control one pair of tubes to adapt to multiple lighting needs to save electricity and conserve bulb life. Includes a set of high output 6500K T5 fluorescent tubes so that you can begin growing with these lights straight out of the box.  This is a plug & play unit.

SPECIFICATIONS:

• Input voltage: 220 - 240Vac
• Input frequency: 50-60 Hz
• Australian Electrical Safty Approval C-tick Number: N3499
• International Safty Certificate RoHS & CE

HYDRO 22:

• Propagation light with a 2ft fixture and series port
• Two lamp of 24 watt in 6500K included
• Package size: 595 x 205 x 100 mm
• Package weight: 2 kgs​​​​​​s

HYDRO 24:

• Propagation light with a 2ft fixture and series port
• Four lamp of 24 watt in 6400K included
• Package size: 595 x 325 x 100 mm
• Package weight: 4 kgs

HYDRO 44:

• Propagation light with a 4ft fixture and series port
• Four lamp of 54 watt in 6500K included
• Package size: 1195 x 325 x 100 mm
• Package weight: 7 kgs​​​​​​​

HYDRO 48:

• Propagation light with a 4ft fixture and series port
• Eight fluorescent tubes of 54 watt in 6400K included
• Package size: 1195 x 650 x 100 mm
• Package weight: 12.5 kgs

2x/4x LED 225 Panels

1x Hydro 22/24/44/48 T5 Unit

4x/9x Square Pots in 18 Litres (with holes)

4x/9x Square Pots in 24 Litres

1x Clamp Fan 180mm

1x Hygrometer

2x Analogue Timers