1.We stand behind every product we sell.
2.All of our brand new items come with a 30-Day money-back or exchange guarantee.
|
|
||||||
|
|
|
|
|||
4x 7mm 5x130 Wheel Spacers M14x1.5 For Porsche Boxster Porsche 911 944 Cayenne
Specifications:
1) Thickness: 7mm
2) Vehicle Bolt Pattern(PCD): 5x130mm
3) Wheel Bolt Pattern(PCD): 5x130mm
4) Hub Diameter: 71.6mm / 2.82"
5) Thread Size: 14x1.5 / M14x1.5 / 14mmX1.5
Note:Please make sure you take the proper neasurements gefore purchasing
Package include: 4Pcs Wheel Spacers Adapters
What should I pay attention to during installation?
1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.
2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.
3) DO NOT proceed if both of the wheel spacer do not fit.
4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers.
5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs).
6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident.
7) All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles.
8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.
How to measure the fender gap to choose suitable thickness?
1) Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.
2) Please take multiple measurements and use the smallest data point.(The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer
thickness= the smallest gap - 3/8"(10mm)
About the wheel bolts:
Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:
1) Shorten the factory studs.
2) The wheels need to have the open slots (cavities) between mounting holes.
3) Purchase a set of shorter studs and replace them with the factory studs.
Vehicle Fitment Information:
Audi:
Audi Q7 2007-2014
Porsche:
Porsche 911 1965-2022
Porsche 928 1978-1991&1993-1995
Porsche 944 1983-1991
Porsche 968 1992-1995
Porsche Boxster 1997-2016
Porsche Cayenne 2003-2022
Porsche Cayman 2006-2016
Porsche Panamera 2010-2021
Volkswagen:
Volkswagen Touareg 2004-2017
Before&After
1. If you want to change the shipping address, please contact us by eBay messages.
2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
3.Payment must be received within 10 days as auction ended or order might be delayed.
1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
1. Orders processed within 24 hours of payment verification.
2. The images shown are not the actual item and are for your reference only.
3. Fast shipping:All our packages use USPS First Class/UPS/Fedex.... Package Service
4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
 New List Item
Hot Item
Shop Category
|
4x 7mm 5x130 Wheel Spacers M14x1.5 For Porsche Boxster Porsche 911 944 Cayenne
Specifications:
1) Thickness: 7mm 2) Vehicle Bolt Pattern(PCD): 5x130mm 3) Wheel Bolt Pattern(PCD): 5x130mm 4) Hub Diameter: 71.6mm / 2.82" 5) Thread Size: 14x1.5 / M14x1.5 / 14mmX1.5 Note:Please make sure you take the proper neasurements gefore purchasing
Package include: 4Pcs Wheel Spacers Adapters
What should I pay attention to during installation?
1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel. 2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short. 3) DO NOT proceed if both of the wheel spacer do not fit. 4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers. 5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs). 6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident. 8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.
How to measure the fender gap to choose suitable thickness?
1) Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.
About the wheel bolts:
Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:
Vehicle Fitment Information:
Audi: Audi Q7 2007-2014
Porsche: Porsche 911 1965-2022
Volkswagen: Volkswagen Touareg 2004-2017
Before&After
1. If you want to change the shipping address, please contact us by eBay messages. 2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 3.Payment must be received within 10 days as auction ended or order might be delayed. 1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
1. Orders processed within 24 hours of payment verification. 2. The images shown are not the actual item and are for your reference only. 3. Fast shipping:All our packages use USPS First Class/UPS/Fedex.... Package Service 4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1.We stand behind every product we sell. 2.All of our brand new items come with a 30-Day money-back or exchange guarantee.
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Copyright of Top-liftsupport. All rights reserved. |
