Compact and ultra-light multi-function device for mountaineering, rescue and self-rescue.

Ultra-light multi-function device for mountaineering, rope access work, rescue and self-rescue. Compact and easy to handle, it has three different modes of operation: ascender, pulley or progress-capture hauling pulley.

FEATURES

• the new design and the different colours of the side plates make using it even more intuitive;
• it allows ascending the rope in accordance with EN 567 / EN 12841-B standards (ascender mode);
• thanks to the ability of locking the cam, it can be used as a simple pulley for lifting or transferring a load in accordance with the EN 12278 standard (pulley mode);
• it allows the direct lifting of a load, the creation of hauling systems and the rescue or self-rescue of a person, as in the case of a victim fallen into a crevasse (progress-capture hauling pulley mode);
• when used in pulley mode, the rope is free to run in both directions; instead, when the hauling-pulley mode is used, the rope can only run in one direction, and it is locked in the opposite one;
• switching from one mode to another is intuitive and it can even be done with gloves on or while operating in difficult conditions;
• its compact size and light weight make it an ideal companion to carry on the harness at all times, for any eventuality.

Caution! This equipment is not a fall arrester (EN 353-2 / EN 12841-A) nor can it be used for self-belaying while climbing.

SPECIFICATIONS

Ascender type: Hand Ascenders

Maximum lifetime: 30 years

Min. temperature: -29 °C

Max. temperature: 40 °C

UIAA compliance: Yes

Min. rope diameter / EN 567: 8 mm

Max. rope diameter / EN 567: 13 mm

Min. rope diameter / EN 12841: 10 mm

Max. rope diameter / EN 12841: 13 mm

Max. rope diameter / EN 12278: 13 mm

Material: Aluminium

Standards: EN 567:2013, EN 12278:2007, EN 12841:2006/B