For Lexus:
    For 2011-2016 Lexus CT200h
    For 2007-2012 Lexus ES350
   For 2006 Lexus GS300 (2006 please verify with your VIN)
   For 2007-2011 Lexus GS350
    For 2007 Lexus GS430
    For 2008-2011 Lexus GS460
    For 2007-2011 Lexus GS450h
    For 2010-2016 Lexus GX460
    For 2005-2009 Lexus GX470
    For 2008-2014 Lexus IS F
    For 2006-2015 Lexus IS250 (2006 please verify with your VIN)
    For 2006-2015 Lexus IS350 (2006 please verify with your VIN)
    For 2007-2012 Lexus LS460L
    For 2008-2012 Lexus LS600hL
   For 2004-2007 Lexus LX470
    For 2008-2015 Lexus LX570
    For 2006 Lexus RX330 (2006 please verify with your VIN)
    For 2007-2015 Lexus RX350
    For 2006-2008 Lexus RX400h (2006 please verify with your VIN)
    For 2010-2015 Lexus RX450h
    For 2007-2010 Lexus SC430
 
For Toyota:
    For 2004-2016 Toyota 4Runner

    For 2007-2011 Toyota Camry
    For 2007-2013 Toyota Corolla
    For 2007-2014 Toyota FJ Cruiser
    For 2008-2013 Toyota Highlander
    For 2005-2015 Toyota Land Cruiser
    For 2006-2015 Toyota Prius
    For 2012-2016 Toyota Prius V
    For 2012-2015 Toyota Prius Plug-in
    For 2006-2012 Toyota Rav-4
    For 2005-2006 Toyota Tundra
    For 2005-2007 Toyota Sequoia
    For 2007-2012 Toyota Avalon
    For 2007-2014 Toyota Matrix
    For 2007-2008 Toyota Solara
    For 2006-2015 Toyota Tacoma
    For 2009-2015 Toyota Venza
    For 2009-2012 Toyota Yaris

For Scion:
    For 2012-2015 Scion iQ
    For 2008-2015 Scion xB
    For 2007-2016 Scion tC
    For 2008-2014 Scion xD

Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.