HELIX COMBO
  • HELIX M FOUR DSP 4x100w RMS + 10-Channel DSP
  • HELIX CONDUCTOR Programable DSP Remote Control


HELIX M FOUR DSP

Features

  • Up to 135 Watts RMS max. output power per channel into 4 & 2 Ω
  • Extremely powerful 64 Bit “fixed point” Audio DSP and state-of-the-art 32 Bit AD and DA signal converters from AKM
  • ACO – Advanced 32 Bit CoProcessor platform for enhanced system and DSP features like:
    • ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
    • SFX sound effects – Augmented Bass Processing, StageXpander, RealCenter & Co.
  • Smart 6-channel highlevel input with ADEP.3 circuit
  • Six RCA / Cinch line outputs with max. 6 Volts output voltage
  • Virtual Channel Processing (VCP) allows even more flexible configuration for highly complex sound systems
  • Bridgeable amplifier channels for driving powerful woofer or subwoofer
  • DSP-board manufactured in Germany

Technical data

Power RMS  ≤ 1% THD+N 
- @ 4 Ohms4 x 100 Watts 
- @ 2 Ohms4 x 100 Watts
- @ 1 Ohm- 
- bridged @ 4 Ohms2 x 200 Watts
- bridged @ 2 Ohms- 
Max. output power per channel*Up to 135 Watts RMS @ 4 / 2 Ohms
Amplifier technologyClass D
Inputs6 x RCA / Cinch
6 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Remote In
Input sensitivityRCA / Cinch 1 - 4 Volts
Highlevel 5 - 20 Volts
Input impedance RCA / Cinch22 kOhms
Input impedance highlevel9 - 33 Ohms or 20 kOhms
Outputs4 x Speaker output
6 x RCA / Cinch
2 x Remote Out
Output voltage RCA / Cinch6 Volts RMS
Frequency response20 Hz - 22,000 Hz
DSP resolution64 Bit
DSP power295 MHz (1.2 billion MAC operations/second)
Sampling rate48 kHz
DSP typeAudio signal processor
Signal-to-noise ratio digital input105 dB (A-weighted)
Signal-to-noise ration analog input102 dB (A-weighted)
Distortion (THD)< 0.03 % 
Damping factor100
Operating voltage10.5 - 16 Volts (max. 5 sec.down to 6 Volts)
Idle current1500 mA
Max. remote output current500 mA
Operating temperature range-40° C to +70° C
Fuse2 x 30 A Maxi-fuse (APX)
Power ratingDC 12 V ⎓ 45 A max.
Additional featuresADEP.3 circuit, Auto Remote switch, 32 Bit CoProcessor, Control Input
Dimensions (H x W x D)50 x 230 x 154 mm /
2.00 x 9.06 x 6.06“


* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)

CONDUCTOR

Features

§  Up to 4 individual volume menus configurable (Master, Digital, HEC/AUX, Subwoofer, Rear Attenuation)

§  Volume range selectable (60 dB, 24 dB, 12 dB)

§  Volume steps selectable (1 dB steps, 0.5 dB steps)

§  Individual color for each volume menu configurable

§  Sound Setup selection between all 10 memory slots

§  Intuitive Bluetooth playback control and pairing activation (only in combination with an optional Bluetooth Extension Card)

§  12 x RGB-LEDs for visual feedback

§  Wide color space with over 16 million colors

§  Brightness and automatic dimming function configurable

§  Easy installation

§  Flush mount installation with Ø 40 mm hole cut-out

§  5 m cable harness with split connector and single connector supply

§  Optional housing for on-dash installation available soon

§  Full configuration and updatability through the DSP PC-Tool software

Technical data

 

CONDUCTOR for Control Input

Housing

ABS housing with machined aluminum knob

Hardware

Rotary encoder, 12 x RGB-LEDs & 48 MHz ARM processorr

Connection

Single connector supply through NanoFit

Cable length

5 m total length – split into 4.8 m connection cable + 0.2 m CONDUCTOR cable

Dimensions (Ø x H)

Ø 46 x 28.7 mm / Ø 1.81 x 1.13”

Installation depth

17 mm / 0.67"