A basic 75mm (3") lap and shoulder, FIA approved 8854:98 saloon harness ideally suited for a saloon or GT car.

Snap hook fixings are fitted all round. The shoulder straps can be wrapped around the roll cage if required.

TRS's lightweight 140 gram quick release buckle is of composite construction and is attached to the right-hand lap strap on 4 point harnesses. Innovative features such as a securing tab for intercom cables on the shoulder strap and thumb loops on lower shoulder straps were all pioneered by TRS and are standard on all of their competition harnesses.

Key Features

• 4 snap hook fixing points
• FIA Homologation 8854:98
• SFI Homologation labelling on request
• Suits saloon/GT cars, with short shoulder version also available for other cars (see dropdown above)
• 75mm (3") shoulder straps
• 75mm (3") lap straps
• Compatible with HANS/FHR devices, however if you intend to only use the harness with a HANS/FHR device we recommend using a 'HANS Only' version with 2" shoulder straps
• Standard colours are Red, Blue and Black. Yellow, Green, Grey/Silver, Orange, Pink, Miami Blue, and Purple are special order (see dropdown above)
• Wrap round shoulder fixing facility
• Rotary quick release buckle
• Securing tab for intercom cables on the shoulder strap
• Thumb loop on lower shoulder straps
• 7/16" UNF eye bolts and instructions included
• Made in England

Please note that the rotary buckle can be fixed to either the left or right hand lap strap. Most people prefer the buckle to be on the lap strap that is closest to the centre of the car / the tunnel. This is so that when the buckle is released it goes towards the centre of the car rather than the door. If you are ordering two harnesses we will always supply one harness with a buckle attached to the left hand lap strap and one harness with a buckle attached to the right hand lap strap. If you are ordering a single harness please confirm whether it is for the driver or passenger side (using the dropdown menu above) and we will supply a harness with the rotary buckle fixed to the appropriate side.

---

Shoulder Straps

• Standard length shoulder straps are approximately 150cm from the adjuster to the fixing point
• Short shoulder version straps are approximately 90cm from the adjuster to the fixing point
• The adjustment range of the lower shoulder strap is between 10cm and 40cm
• If you plan to fix the shoulder straps in place by wrapping them around a roll bar we would recommend going with the standard length shoulder straps as you will need approximately 50cm of excess webbing to wrap around securely
• The fixings at the end of the shoulder straps are not sewn on, and can easily be removed if you plan to wrap the shoulder straps around a roll bar

---

Options

Free Keyring With Every TRS Order!

Exclusive offer for Carnoisseur customers! We are now giving away a free TRS keyring worth £12.95 with every order for TRS harnesses!

This superb keyring from TRS is made from the same high quality webbing as their harnesses, and is available in the same range of colours too: Black, Red, Blue, Yellow, Green, Grey/Silver, Orange, Pink, Miami Blue, and Purple. Made in the UK at the TRS factory, the keyring is 10cm in length, and is a great looking, practical accessory for all motorsport enthusiasts.

The keyring supplied will be the same colour as the harness ordered. If you'd prefer a different colour, get in touch to let us know.

Please note that just one keyring is provided per order.

---

Webbing Colour

TRS Harnesses are available in 10 different webbing colours: Red, Blue, Black, Yellow, Green, Grey/Silver, Orange, Pink, Miami Blue, and Purple.
Red, Blue, and Black harnesses are the most common colours, so harnesses in those colours are usually in stock, if you need your harnesses in a hurry.

---

Adjusters

You can upgrade the harnesses to the Superlite or Ultralite versions. As standard TRS harnesses use steel anti-creep adjusters. Also available are premium aluminium alloy adjusters, which in addition to being lightweight, offer a smoother and faster adjustment. The Superlite harnesses use these lightweight aluminium adjusters on the shoulder straps, and the Ultralite harnesses use them on both the shoulder and lap straps.

They are highly recommended for vehicles being shared between multiple drivers, and in general we always recommend upgrading to the aluminium adjusters due to their premium look and feel.

---

Short Shoulder Straps

A short shoulder version is available, which are approximately 90cm from the adjuster to the fixing point, compared to 150cm as standard.

---