Reolink changed the design of the TrackMix model rear mounting plate during 2026.
There are now two different mounting plate designs.
The newer TrackMix model has a separate rear mounting plate which is supplied unattached in the box and is screwed onto the camera.
This listing is for the UPDATED bracket designed specifically for this newer mounting plate.
The earlier TrackMix model has a rear mounting plate permanently attached to the camera.
The original version of this bracket is still available on request for customers with the earlier TrackMix model.
Please look at the mounting plate comparison photograph before ordering.
If you're still unsure, send us a photograph of the rear of your camera before ordering and we'll be happy to confirm which version you need.
Need to mount your Reolink TrackMix around a 90° external corner?
This purpose-designed corner bracket provides a strong, rigid and neat mounting solution where a standard wall mount isn't suitable.
The bracket has been designed specifically around the TrackMix mounting system rather than being a generic universal camera bracket.
✓ Designed specifically for Reolink TrackMix
✓ Updated design for the latest TrackMix mounting plate
✓ Heavy-duty construction
✓ Approximately 398 g of PET-G used per bracket
✓ Strong and rigid design
✓ Integrated rear cable-management channel
✓ Helps keep the camera cable neat and tidy
✓ Camera mounting screws included
✓ Designed and 3D printed in the UK
✓ New Grey finish selected to closely complement the grey TrackMix
Reolink changed the dimensions and design of the TrackMix rear mounting plate during 2026.
The bracket has therefore been redesigned to match the new detachable mounting plate supplied with the latest cameras.
If your TrackMix has the new mounting plate supplied separately in the box, this is the version you need.
If you have an earlier TrackMix with the mounting plate permanently attached to the camera, the original bracket design is still available.
Please contact us before ordering and we can supply the correct version for your camera.
The original design remains fully functional with the earlier mounting plate.
The bracket is 3D printed from PET-G, a tough material commonly used for functional 3D-printed components.
Approximately 398 g of PET-G is used to produce each bracket.
The design deliberately prioritises strength and rigidity rather than minimising material usage and print time.
The rear of the bracket incorporates a dedicated cable channel.
This allows the camera cable to be routed neatly behind the bracket instead of simply hanging around the outside of the mount.
The cable can also be routed towards the top of the bracket to help create a neat cable route and drip loop where appropriate.
This listing is for the Grey version.
The grey filament has been selected specifically because it provides a close colour match to the grey version of the Reolink TrackMix camera.
The result is a much more discreet and integrated-looking installation than a contrasting black bracket.
1 × Reolink TrackMix Heavy-Duty Corner Mount – Grey
Camera mounting screws included
Wall fixing screws are not included, as the appropriate fixings depend on the type of wall or surface onto which the bracket is being installed.
Camera shown in photographs is NOT included.
Every bracket is designed and 3D printed in the UK.
Because this is a 3D-printed product, minor layer lines or small variations in surface finish may be visible. These are a normal characteristic of the manufacturing process and do not affect the function of the bracket.
If you have a particular installation requirement or need a modification to the design, please contact us before ordering.
We may be able to adapt the design to suit your installation.
Please check the rear mounting plate on your TrackMix and make sure you are ordering the correct version.
If your mounting plate is separate and screws onto the camera → this listing is for you.
If your mounting plate is permanently attached to the camera → contact us for the original version.
If you're unsure, simply send us a photograph of the rear of your TrackMix and we'll help identify the correct bracket.