ECCPP-Headlights and Taillights

Specification:

1.[Quality Assurance]

100% Brand New!Fully sealed with solid silicone and designed with one-way vents to prevent moisture from entering the chassis. There is no need to worry about corrosion or moisture under any conditions.

2.[Impact Resistant & Tough]

Using durable polycarbonate lenses that provide good protection, cover imperfections and eliminate shock on the trails, the high-impact shell can also better withstand the shock and vibration of off-road risks.

3.[Brighter Lighting & Safety]

Metal parabolic reflector provides more light output, wider and smoother beam. Microprism reflectors on the side allow oncoming vehicles or passers-by to quickly notice you at night, keeping you and others safe while driving.

Which Vehicles Is This Product Fit For?

  Tip1: Search for vehicle year, make, model and installation location in our store.

  Tip2: If you are unsure, please contact us via the eBay message and provide the year, make and model of your vehicle. Let us know which products you are interested in so that we can check the accessories and get back to you as soon as possible.

How to install lights correctly?

Plug-n-Play Operation, Direct Bolt-On OE Fitment or Replacement for the Stock Unit.

Requires no Modification or Drilling.

1.Undo the screws, clips, or retainer springs that hold the light in place.

2. Disconnect the wiring from the assembly.

3. Detach the light from the vehicle to replace it with a new one.

4. Fit in the new light assembly.

5. Fix the new light into place and make sure that the screws, clips, or retainer springs are sealed.

6. Reconnect the wiring that was unplugged from the assembly.

7. Put back the grille and other components that you removed. Seal them back into place.

8. Test the new assembly.

Note: ?Installation instruction is not included. Professional installer is highly recommended!

What are some common causes of light condensation?

1. Large changes in daily temperature.

2. Water vapor easily collects as dew point or humidity increases.

3. Leaking seals on bulbs and/or bulb sockets.This is a common occurrence and won't affect the light function.

HOW TO SOLVE?

1.Check that all vents are free from blockages. Turn on the low beam for 20 mins to raise the light temperature and evaporate condensation.

2.Remove bulbs to allow moisture to evaporate from inside the housing. Heat with a hairdryer or heat gun at a low temperature to speed up the process.

3.Leaking seals on bulbs or bulb sockets. Put moisture-absorbing silica-gel desiccant packet inside the light.

How to solve the problem that the light bulb does not work?

1.Check if the bulb is intact and replace it with a new bulb of the correct model. If you don't know the model,please contact us for confirmation.
2.Check if the wiring socket has water in it or is loose. You can unplug the corresponding function plug and plug it in again to observe. It may also be that the pins of the plug are in poor contact, resulting in no power. Check if the wiring is correct. If the wiring is normal, it may be a circuit board problem.
3.Check if the assembly wiring harness plug has retreated. The pins of the plug have retreated inward.